Top Best 37 Computer Cases: Tower PC Cases – Best Buy in November 2021

4812Reviews Scanned
1ST PLACE
CORSAIR
CORSAIR - iCUE 220T ATX Mid-Tower Case with Tempered Glass - White
Description

Create a customized computer setup with this CORSAIR iCUE RGB Airflow mid-tower case. The stainless steel and tempered glass construction ensure durability, while the front grill and three CORSAIR PRO fans offer ample airflow for rapid heat dissipation. This CORSAIR iCUE RGB Airflow mid-tower case has removable dust filters for high performance and fits up to four storage drives.

7 Features
  • Steel construction: Provides durability for long-lasting use.
  • 4 drive bays: Include 2 internal 3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 3.0 and 1 headphone/microphone jacks for installing peripherals.
  • 3 cooling fans: Include 3 front-mounted 120mm fans. Two 120/140mm top fan mounts and one 120mm rear fan mount allow easy enhancements.
  • Top panel, front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 3 Most Useful Reviews
  • Review by Dani, 10 out of 10
    NICE

    REALLY GOOD. The dust filter keeps the dust out really good. I overall really like the size of the case and how it looks.

    Mar 29, 2020 07:42
  • Review by stve, 10 out of 10
    Good Quality

    I wanted a good looking case that had good airflow as well. This case has a front panel that looks nice and is able to have airflow. The 3 black rgb fans that are included work well. You don’t need anything extra to work the fans, it comes with everything included. Comes with plenty of extra screws. FYI the back panel slides off to the side. The instructions didn’t tell me that.

    For new time builders: be aware of the sizing for everything before you go and purchase any case. I thought this case would be the perfect size since I made sure to match the motherboard to the size of case I needed. The psu I chose barely fit, and I even made sure to check the psu clearance and matched it perfectly. Yea.. I would suggest making sure you have EXTRA space. This goes for fans as well. I was able to fit only 5 fans so if you want one of those cases with like 6 or 9 fans, you’ll need a full tower. That was my mistake but still worked out great.

    Jun 04, 2021 16:04
  • Review by Lhayes44, 10 out of 10
    Great case

    Beautiful case. Exactly what I needed for my all white build.

    Aug 06, 2021 15:36
  • 10score
    View Product
    BEST SELLER
    MSI - MPG GUNGNIR 110R ATX Mid-Tower Case
    Description

    The MPG series brings out the best in gamers by allowing full expression in color with advanced RGB lighting control and synchronization. Experiment on another level of personalization with a front LED strip that provides convenient in-game and real time notifications. With the MPG series, transform your equipment into the center of attention and top leaderboards in style. THE FOUNDATION FOR EXCELLENCE. Excel with the MPG GUNGNIR 110 Series, the epitome of high standards in a mid-tower chassis. Designed with versatility, constructed from high-quality materials, and born for performance. Choose eminence and embrace excellence. BEAUTIFUL CRAFTSMANSHIP. The MPG GUNGNIR 110R is designed with a memorable high-performance look to impress on first sight. A sleek front glass panel offers a dazzling view of the interior lighting that highlights the quality of the parts in the rest of the system. BETTER TOGETHER. Synergize MPG GUNGNIR 110 Series with an MSI motherboard including bridging a USB Type-C port for convenient access. Establish a complete MSI gaming ecosystem with a graphics card and liquid cooling. INSTA-LIGHT LOOP BUTTON. Quickly control the fan color and lighting effects with Insta-Light Loop at the touch of a button. Click through the profiles at ease and choose a favorite. TEMPERED GLASS WINDOW. MPG GUNGNIR 110 Series reveals your arsenal with a tempered glass side panel. Arm the system with MSI’s liquid cooler, motherboard, and graphics card for the ultimate display of power and performance.

    6 Features
  • 6 drive bays: Include 2 internal 2x2.5"/3.5" and 4 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: USB 3.2 Gen 1 Type A x 2, USB 3.2 Gen 2 Type C x1, Audio x1, Mic x1
  • 4 cooling fans: Include 3 front-mounted 120mm and 1 rear 120mm fans. Three 120mm top fan mounts allow easy enhancements.
  • 7 expansion slots: For adding graphics cards and other components.
  • Cable management: Lets you easily route cables for enhanced system airflow.
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by sockknocker, 10 out of 10
    Great beginner case

    This has been one of the better cases I have owned, it has good air flow and a nice look.

    Oct 27, 2021 09:51
  • Review by timmym88, 10 out of 10
    great case

    great case plenty of space. cable management was perfect

    Oct 30, 2021 18:48
  • Review by SternSoup, 10 out of 10
    Excellent Mid Case! Way Better Than I Expected

    Lots of people have given this negative reviews and I couldn’t disagree with them more. Excellent sturdy build materials down to heavy glass shield. Some do not like the fact the front is totally open mesh for air but this case is large snough and has such a big air gap around it that you should be able to get whatever cooling devices you can dream up for this build. SSD rack inside even slides back for easy installation of an AIO. Now I just need my RyZen 9 to come and I’ll have it done. Worth the wait

    Sep 10, 2021 06:23
  • Review by Theguyfrommars, 10 out of 10
    Very good product

    The case is definitely something to look at and set up was super easy!

    Aug 18, 2021 13:52
  • Review by Philo, 10 out of 10
    It fits everything so far

    It is overall a good case with a rgb hub to control your lighting effect and also comes in eith a 3 way fan power connector for your preinstalled argb fans and the build wuality is good too and easy to use hope this helps :(

    Nov 05, 2021 17:55
  • Review by SMITTY, 10 out of 10
    MSI Case

    great quality case, bought matching cooler so all of my motherboard, coolers, case are msi

    Nov 04, 2021 07:48
  • Review by Heriberto, 10 out of 10
    functional

    it really is a very beautiful and functional chassis

    Sep 07, 2021 20:40
  • Review by hngdmn, 10 out of 10
    Great case, especially for the price

    Solid case, does what it's supposed to. Definitely cable management friendly. Trying to work around the HDD cabinet on the bottom is cumbersome, so I recommend removing it at the start of your build. The panel along the top is suitable for basic use. No serious qualms, I highly recommend.

    Sep 23, 2021 11:38
  • 3
    GAMDIAS
    GAMDIAS - Mars E2 Micro ATX Mini-Tower Case - White
    Description

    Build your own gaming rig from scratch with this GAMDIAS Mars E2 micro-tower PC case. The hinged panel with a tempered glass design offer easy access to the roomy interior, letting you fit components hassle-free, while the user-friendly I/O panel layout enables advanced rig modifications. This GAMDIAS Mars E2 micro-tower PC case with a brushed aluminum coating features a removable dust filter to keep your gaming station neat.

    8 Features
  • Anodized aluminum construction: Ensures durability.
  • Drive bays: Its convertible configurations include 2 x 3.5", 1 x 2.5" plus 1 x 3.5", or 2 x 2.5".
  • Front-panel ports: Include two USB 3.0, one microphone jack, and one headphone jack for connecting peripherals.
  • Tempered glass swing side panel with magnetic closure: Enables easy access to the system internals, allowing you to put your rig on display and showcase it with pride.
  • Magnetic dust filter at the top: Allows easy system cleaning.
  • Up to five cooling fans supported: Includes a 120mm rear fan and is capable of supporting up to five 120mm fans. It features mounting slots for a 280mm front x 240mm top x 120mm rear radiator.
  • Four expansion slots: Enable adding graphics cards and other components. It supports cards up to 350mm (13.7") in length.
  • Supports microATX and miniITX motherboards: You can easily begin building a custom computer.
  • 4 Most Useful Reviews
  • Review by Jonni, 10 out of 10
    Awesome case

    Thanks bestbuy I love this case. A+ QUALITY was very easy to setup, sits on my desk next to my ps5. Cable management wasnt too bad either. Very good quality case for the money. Air flow is adequate aswell. A Very happy customer here. Thankyou once again

    Apr 29, 2021 21:14
  • Review by NotAGamer, 10 out of 10
    First day review

    This a first day review so treat it as much, the case is great! It fits all the hardware I need. The front will be a tight fit for a radiator but fans fit well and the top has ample room for one if you desire it. No CD drive location and it only comes with on hdd tray, not a real negative in 2021. Has two other ssd mounting locations. Thing is great. Would recommend. I'll edit if I have any issues

    Aug 12, 2021 18:52
  • Review by Calvin, 10 out of 10
    Swing panel is a bonus!

    Love the case! swing side panel is the way to go to all builds!

    Oct 22, 2021 23:59
  • Review by John, 10 out of 10
    Great little case!

    This is an absolutely amazing case for the price. Love the small form factor as well as how sleek it is.

    May 21, 2021 17:53
  • GAMDIAS - TALOS M1B ATX Tower Case - Black
    Description

    Build an ultimate machine for work or play with this Gamdias TALOS mid-tower chassis. The three 120mm RGB fans ensure proper cooling, while the tempered single glass door is held by a magnet to offer protection and showcase your rig's appearance. This Gadmias TALOS mid-tower chassis features swappable I/O ports for easy I/O plate relocation.

    10 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 4 drive bays: Include 2 internal 2.5"/3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 2.0, 1 microphone jack, 1 audio line-out and 2 USB 3.0 for installing peripherals.
  • Windowed front panel: Offers an unobstructed view of the case's contents.
  • 3 cooling fans: Include 3 front-mounted 120mm fans. Two 120/140mm top fan mounts and one 120/140mm rear fan mount allow easy enhancements.
  • Top magnetic fan filter: Helps maintain a dust-free interior.
  • Built-in fan controller: For cool and quiet operation.
  • 9 expansion slots: For adding graphics cards and other components.
  • Sleek black exterior: Adds sleek style to your office.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 3 Most Useful Reviews
  • Review by Mcdouglas, 10 out of 10
    Great product

    great product for a high performance computer and easy install

    Oct 16, 2021 15:35
  • Review by Cflorida, 10 out of 10
    Love it!

    Love the case! Looks amazing and even better than I expected. Had a very difficult time fitting my ram in with my radiator and fans mounted to the top so if you are doing the same thing be very careful on which parts you buy for it to fit.

    May 08, 2021 06:48
  • Review by Mint, 10 out of 10
    It's pretty Good

    I wasn't to sure since it had no reviews but man this is awesome glad I purchased it

    Jan 21, 2021 03:57
  • GAMDIAS - Mars E2 Micro ATX Mini-Tower Case - White
    Description

    Build your own gaming rig from scratch with this GAMDIAS Mars E2 micro-tower PC case. The hinged panel with a tempered glass design offer easy access to the roomy interior, letting you fit components hassle-free, while the user-friendly I/O panel layout enables advanced rig modifications. This GAMDIAS Mars E2 micro-tower PC case with a brushed aluminum coating features a removable dust filter to keep your gaming station neat.

    8 Features
  • Anodized aluminum construction: Ensures durability.
  • Drive bays: Its convertible configurations include 2 x 3.5", 1 x 2.5" plus 1 x 3.5", or 2 x 2.5".
  • Front-panel ports: Include two USB 3.0, one microphone jack, and one headphone jack for connecting peripherals.
  • Tempered glass swing side panel with magnetic closure: Enables easy access to the system internals, allowing you to put your rig on display and showcase it with pride.
  • Magnetic dust filter at the top: Allows easy system cleaning.
  • Up to five cooling fans supported: Includes a 120mm rear fan and is capable of supporting up to five 120mm fans. It features mounting slots for a 280mm front x 240mm top x 120mm rear radiator.
  • Four expansion slots: Enable adding graphics cards and other components. It supports cards up to 350mm (13.7") in length.
  • Supports microATX and miniITX motherboards: You can easily begin building a custom computer.
  • 4 Most Useful Reviews
  • Review by Jonni, 10 out of 10
    Awesome case

    Thanks bestbuy I love this case. A+ QUALITY was very easy to setup, sits on my desk next to my ps5. Cable management wasnt too bad either. Very good quality case for the money. Air flow is adequate aswell. A Very happy customer here. Thankyou once again

    Apr 29, 2021 21:14
  • Review by NotAGamer, 10 out of 10
    First day review

    This a first day review so treat it as much, the case is great! It fits all the hardware I need. The front will be a tight fit for a radiator but fans fit well and the top has ample room for one if you desire it. No CD drive location and it only comes with on hdd tray, not a real negative in 2021. Has two other ssd mounting locations. Thing is great. Would recommend. I'll edit if I have any issues

    Aug 12, 2021 18:52
  • Review by Calvin, 10 out of 10
    Swing panel is a bonus!

    Love the case! swing side panel is the way to go to all builds!

    Oct 22, 2021 23:59
  • Review by John, 10 out of 10
    Great little case!

    This is an absolutely amazing case for the price. Love the small form factor as well as how sleek it is.

    May 21, 2021 17:53
  • CORSAIR - iCUE 5000X ATX RGB Tempered Glass Mid-Tower - White
    Description

    The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables, behind four stunning tempered glass panels. Easily route major cables through a single channel for clean builds with CORSAIR RapidRoute design and 25mm of routing depth. A wealth of flexible cooling options let you build your PC your way, including room to mount up to 10x 120mm fans or multiple 360mm radiators, and a motherboard tray with customizable side fan mounts. Three included 120mm SP RGB ELITE fans deliver enhanced cooling and vibrant lighting. Complete with room for four storage drives and a modern front I/O panel including a USB-C port, the 5000X RGB makes for a clean build that keeps its cool.

    10 Features
  • Clear, Clean, and Cool: The 5000X RGB makes a stunning, showpiece-worthy PC easy to build and easier to keep cool with the space and flexibility to mount multiple 360mm radiators, all surrounded by beautiful tempered glass on four sides.
  • Four Tempered Glass Panels: House your system behind tool-free tempered glass, highlighting your components and RGB lighting.
  • CORSAIR RapidRoute Cable Management System: Makes it simple and fast to route your major cables through a single hidden channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Three Included 120mm RGB Fans: CORSAIR SP RGB ELITE fans utilize AirGuide anti-vortex vanes to concentrate airflow and enhance cooling. Each fan is equipped with eight individually addressable RGB LEDs for brilliant lighting.
  • Smart RGB Lighting Out-of-the-Box: Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
  • Motherboard Tray with Customizable Fan Mounts: Side-mount up to 3x 120mm fans or up to a 360mm radiator, enabling new flexible cooling options.
  • Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.
  • Modern Front Panel I/O: Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: Fits up to 4x 2.5in SSDs and 2x 3.5in HDDs
  • Power Supply: ATX Not Included
  • 8 Most Useful Reviews
  • Review by Moon, 10 out of 10
    Awesome casing, roomy and airy

    This is a great casing. The pictures in the listing really doesnt do it justice because it is way more beautiful when ou actually look at it all installed and working.

    The cable management space at the back is deep enough to run a lot of cables, even the fat ones.

    You can add/ remove particular segments in the casing according to how you want it to look like. (pic attached).

    Even though it is glass at the front and top, it still has enough clearing to throw the air out rather than just throwing it right back in. My CPU and GPU temps are normal.

    Oct 25, 2021 10:24
  • Review by zzzzzz, 10 out of 10
    Love this thing!

    My RTX 3080TI was running a bit hot in my little NZXT case so I purchased this beauty. I was able to top mount my AIO for the CPU and run a ton of fans. I am noticing 10 degrees cooler GPU temps in Warzone. The case is super easy to cable manage, has a ton of room, and looks great.

    Oct 21, 2021 19:08
  • Review by WFSJR, 10 out of 10
    Corsair almost got perfect.

    One of Corsair best case out right now. The ability to put thirteen (13th) fans in this case is what sold me. Although, the case only comes with a 6 port to control six fan. Which is okay because if your going all Corsair you'll get more hubs with AIO and 3-packs of RGB (like the LL140). Though if you got extra 60-75 bucks, add a Corsairs Commander Pro to make you life easier on install.

    I was going to put Intel's 11th Gen in the case and heard they ran hot. But after not being able to buy one at release, I went with top 10 tenth (10th) Gen.

    The front of the case has plenty of room. Making it easy to mount AIO radiator in four positions. Those being top of case, inside top, side and front. I choose inside top to make push/pull configuration. Also, Guess this is for Water Cooler Pumps or Dolls peps like to put inside. Either way I'll take it. Who knows maybe I'll get a Doll too.

    The side (back of motherboard) the case is where we all have trouble it seem. Although Corsair has improve this case and made it real slick. Two (2) more inches here would be nice. Although, it is nice that they provided a door to cover but felt like I squashed wire (just a little) when closing. Also, Power Supply Unit (PSU) is not that easy to install. Make sure to account for bundle wire space. I remove the Hard Drive (HD) bay on bottom to add more space for wire bundles. Corsair if you listening, please add a backplate temple to allow the PSU to slide in from back instead of placing PSU from inside. Makes for easier mount and cable management.

    A little pricy for most enthusiast builders but that's cause it is well made. So if you ask me if I had to do build a PC again today. I would still choose this case.

    May 31, 2021 10:38
  • Review by Rubis, 10 out of 10
    Corsair have outdone themselves

    Nice case especially if it’s all rgb Corsair is very reliable. Running a

    Intel i9 tenth gen

    Msi z490 meg

    2tb M.2 Samsung 980 Pro

    Aio Corsair 360 radiator liquid cooler

    Evga 1000wat gold power supply

    Corsair 13 rgb 120 fans

    Corsair 5000x case

    Aug 20, 2021 17:22
  • Review by NateDogg, 10 out of 10
    Love it.

    Great case. Thermals are fantastic and build quality is top of the line.

    Jul 30, 2021 20:37
  • Review by DaveTheBraveUSA, 10 out of 10
    An electronic showcase

    This case is really a display case which presents the electronic beauty of a computer build. Behind the tinted tempered glass the build is seen with unsightly wiring hidden behind panels. The cable management system in the rear is very good. Cable accommodations with the HDD cage in place and a 180mm PSU are tight. The cage must be moved all the way to the left. The case is rated to take a 220mm PSU but I think the HDD cage would have to go. The spacious front interior is easily ventilated and it invites an emphasis on RGB lighting. It comes with a iCUE lighting node core module for lighting for the 3 fans, but not fan speed control. Fan speed control requires a Commander Core and fans that support speed control. I don't believe that the fans that come with the case do support remote speed control, but the fans with the iCUE H150i Elite Capellix liquid cooler certainly do as do the QL 120 RBG fans I also installed. One of the original case fans did have to be sent to Corsair RMA because it made a tapping sound, and I am waiting for the return. Other than that all the fans are ultra quiet and can barely be heard.

    Everything fits together so precisely. Once learned how. the side panels are removed and reattached very easily. They snap in place and are secured by thumb screws that don't fall off, they stay with the panel. One downside of the panels is that they are glass and do require some careful handling. However Corsair does sell replacements. There are so many thoughtful touches with this case. A removable door opens to reveal the wiring. The filters are easily removed for cleaning.

    This case is a large midsize and I think Corsair should think about carrying this design over to a full size case. This is a wonderful PC case and I think Corsair hit a homerun with it and the entire 5000 line.

    Jun 04, 2021 23:24
  • Review by Styles, 10 out of 10
    This case is Big

    This case has a nice tinted glass look. Great Airflow and thermals are great. No temps of 60 degree C while gaming. Corsair RBG Ram Fits perfect with top mounted radiator. The Ram does not interfere with the fans or radiator. Oh and Fans, You can install up to 12 fans in this bad boy. Cable management is a breeze, with the cable channels in the back and if you're not into or not great at cable management there is a door that covers the wires. Overall, I recommend...

    Aug 27, 2021 16:17
  • Review by Mike, 10 out of 10
    great case with a ton of airflow

    great airflow. looks neat. can fit 3090 and 360mm Rad. the paint appears to be pretty thick, so it seems more resilient to scratching. would definitely recommend this case.

    Jul 23, 2021 10:55
  • 9.8score
    CORSAIR - iCUE 5000X ATX RGB Tempered Glass Mid-Tower - Black
    Description

    The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables, behind four stunning tempered glass panels. Easily route major cables through a single channel for clean builds with CORSAIR RapidRoute design and 25mm of routing depth. A wealth of flexible cooling options let you build your PC your way, including room to mount up to 10x 120mm fans or multiple 360mm radiators, and a motherboard tray with customizable side fan mounts. Three included 120mm SP RGB ELITE fans deliver enhanced cooling and vibrant lighting. Complete with room for four storage drives and a modern front I/O panel including a USB-C port, the 5000X RGB makes for a clean build that keeps its cool.

    10 Features
  • Clear, Clean, and Cool: The 5000X RGB makes a stunning, showpiece-worthy PC easy to build and easier to keep cool with the space and flexibility to mount multiple 360mm radiators, all surrounded by beautiful tempered glass on four sides.
  • Four Tempered Glass Panels: House your system behind tool-free tempered glass, highlighting your components and RGB lighting.
  • CORSAIR RapidRoute Cable Management System: Makes it simple and fast to route your major cables through a single hidden channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Three Included 120mm RGB Fans: CORSAIR SP RGB ELITE fans utilize AirGuide anti-vortex vanes to concentrate airflow and enhance cooling. Each fan is equipped with eight individually addressable RGB LEDs for brilliant lighting.
  • Smart RGB Lighting Out-of-the-Box: Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
  • Motherboard Tray with Customizable Fan Mounts: Side-mount up to 3x 120mm fans or up to a 360mm radiator, enabling new flexible cooling options.
  • Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.
  • Modern Front Panel I/O: Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: Fits up to 4x 2.5in SSDs and 2x 3.5in HDDs
  • Power Supply: ATX Not Included
  • 8 Most Useful Reviews
  • Review by Moon, 10 out of 10
    Awesome casing, roomy and airy

    This is a great casing. The pictures in the listing really doesnt do it justice because it is way more beautiful when ou actually look at it all installed and working.

    The cable management space at the back is deep enough to run a lot of cables, even the fat ones.

    You can add/ remove particular segments in the casing according to how you want it to look like. (pic attached).

    Even though it is glass at the front and top, it still has enough clearing to throw the air out rather than just throwing it right back in. My CPU and GPU temps are normal.

    Oct 25, 2021 10:24
  • Review by zzzzzz, 10 out of 10
    Love this thing!

    My RTX 3080TI was running a bit hot in my little NZXT case so I purchased this beauty. I was able to top mount my AIO for the CPU and run a ton of fans. I am noticing 10 degrees cooler GPU temps in Warzone. The case is super easy to cable manage, has a ton of room, and looks great.

    Oct 21, 2021 19:08
  • Review by WFSJR, 10 out of 10
    Corsair almost got perfect.

    One of Corsair best case out right now. The ability to put thirteen (13th) fans in this case is what sold me. Although, the case only comes with a 6 port to control six fan. Which is okay because if your going all Corsair you'll get more hubs with AIO and 3-packs of RGB (like the LL140). Though if you got extra 60-75 bucks, add a Corsairs Commander Pro to make you life easier on install.

    I was going to put Intel's 11th Gen in the case and heard they ran hot. But after not being able to buy one at release, I went with top 10 tenth (10th) Gen.

    The front of the case has plenty of room. Making it easy to mount AIO radiator in four positions. Those being top of case, inside top, side and front. I choose inside top to make push/pull configuration. Also, Guess this is for Water Cooler Pumps or Dolls peps like to put inside. Either way I'll take it. Who knows maybe I'll get a Doll too.

    The side (back of motherboard) the case is where we all have trouble it seem. Although Corsair has improve this case and made it real slick. Two (2) more inches here would be nice. Although, it is nice that they provided a door to cover but felt like I squashed wire (just a little) when closing. Also, Power Supply Unit (PSU) is not that easy to install. Make sure to account for bundle wire space. I remove the Hard Drive (HD) bay on bottom to add more space for wire bundles. Corsair if you listening, please add a backplate temple to allow the PSU to slide in from back instead of placing PSU from inside. Makes for easier mount and cable management.

    A little pricy for most enthusiast builders but that's cause it is well made. So if you ask me if I had to do build a PC again today. I would still choose this case.

    May 31, 2021 10:38
  • Review by Rubis, 10 out of 10
    Corsair have outdone themselves

    Nice case especially if it’s all rgb Corsair is very reliable. Running a

    Intel i9 tenth gen

    Msi z490 meg

    2tb M.2 Samsung 980 Pro

    Aio Corsair 360 radiator liquid cooler

    Evga 1000wat gold power supply

    Corsair 13 rgb 120 fans

    Corsair 5000x case

    Aug 20, 2021 17:22
  • Review by NateDogg, 10 out of 10
    Love it.

    Great case. Thermals are fantastic and build quality is top of the line.

    Jul 30, 2021 20:37
  • Review by DaveTheBraveUSA, 10 out of 10
    An electronic showcase

    This case is really a display case which presents the electronic beauty of a computer build. Behind the tinted tempered glass the build is seen with unsightly wiring hidden behind panels. The cable management system in the rear is very good. Cable accommodations with the HDD cage in place and a 180mm PSU are tight. The cage must be moved all the way to the left. The case is rated to take a 220mm PSU but I think the HDD cage would have to go. The spacious front interior is easily ventilated and it invites an emphasis on RGB lighting. It comes with a iCUE lighting node core module for lighting for the 3 fans, but not fan speed control. Fan speed control requires a Commander Core and fans that support speed control. I don't believe that the fans that come with the case do support remote speed control, but the fans with the iCUE H150i Elite Capellix liquid cooler certainly do as do the QL 120 RBG fans I also installed. One of the original case fans did have to be sent to Corsair RMA because it made a tapping sound, and I am waiting for the return. Other than that all the fans are ultra quiet and can barely be heard.

    Everything fits together so precisely. Once learned how. the side panels are removed and reattached very easily. They snap in place and are secured by thumb screws that don't fall off, they stay with the panel. One downside of the panels is that they are glass and do require some careful handling. However Corsair does sell replacements. There are so many thoughtful touches with this case. A removable door opens to reveal the wiring. The filters are easily removed for cleaning.

    This case is a large midsize and I think Corsair should think about carrying this design over to a full size case. This is a wonderful PC case and I think Corsair hit a homerun with it and the entire 5000 line.

    Jun 04, 2021 23:24
  • Review by Styles, 10 out of 10
    This case is Big

    This case has a nice tinted glass look. Great Airflow and thermals are great. No temps of 60 degree C while gaming. Corsair RBG Ram Fits perfect with top mounted radiator. The Ram does not interfere with the fans or radiator. Oh and Fans, You can install up to 12 fans in this bad boy. Cable management is a breeze, with the cable channels in the back and if you're not into or not great at cable management there is a door that covers the wires. Overall, I recommend...

    Aug 27, 2021 16:17
  • Review by Mike, 10 out of 10
    great case with a ton of airflow

    great airflow. looks neat. can fit 3090 and 360mm Rad. the paint appears to be pretty thick, so it seems more resilient to scratching. would definitely recommend this case.

    Jul 23, 2021 10:55
  • 9.8score
    CORSAIR - 4000D Mid Tower Case
    Description

    The CORSAIR 4000D is a distinctive, yet minimalist, mid-tower ATX case with easy cable management and exceptional cooling. A highly durable solid steel front panel and dedicated ventilation channels combine to offer great looks and airflow, accompanied by two included 120mm AirGuide fans that enhance cooling. CORSAIR RapidRoute design makes it effortless to route major cables through a single channel.

    8 Features
  • A Fitting Choice: Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, choose the 4000D for an immaculate high-performance PC.
  • Solid Steel Front Panel: Solid Steel Front Panel Offers superb durability and sharp looks, with wide ventilation channels for ample airflow.
  • RapidRoute Cable Management: CORSAIR RapidRoute Cable Management System Makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Two Included 120mm Fans: CORSAIR AirGuide fans utilize anti-vortex vanes to concentrate airflow and enhance cooling.
  • Extreme Cooling Potential: A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including a 360mm in front and 280mm in the roof (dependent on RAM height).
  • Modern Front Panel I/O: Modern Front Panel I/O Puts your connections within easy reach, including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: Fits up to 2x SSDs and 2x HDDs.
  • Tool-Free Tempered Glass Side Panel: Tool-Free Tempered Glass Side Panel Show off your high-profile components and RGB lighting.
  • 8 Most Useful Reviews
  • Review by Farid, 10 out of 10
    The best, most versatile case I have ever seen.

    This case delivered far beyond my expectations. Exceptional build quality! The side glass is just a pleasure to look at all the time. Best of all, it looks great!

    Dec 18, 2020 22:26
  • Review by homer, 10 out of 10
    Great case for the price.

    Big, spacious, and if paired with the correct fans you can have tremendous airflow on a silent PC. Love the tinted window on the side.

    Oct 29, 2021 10:34
  • Review by Vyseros, 10 out of 10
    Minimalistic look

    I like the look. I went with this case because I didnt like how the 3 circular fans looked in the front of the case. I wanted something that would be subtle. The side panel is glass, so you can still see all your little RGB lol but the front looks very minimalistic and clean, which I like.

    Aug 01, 2021 22:17
  • Review by MrRagerOfTheSoloDolo20, 10 out of 10
    Amazing PC Case!!! Highly recommended!!

    Such an awesome case for anyone into pc gaming! I bought this case because I wanted to upgrade my previous case.

    One thing I love about the 4000D is that it is very easy to build in. It has built in cable management which works wonders. It also has a cable shroud which looks cleaner than cable grommets seen in most cases.

    Another thing I love about this case is that it looks like it is very easy to clean. My previous case had a dust filter in the front which caught dust very easily and was not pleasant to look at and was very difficult to clean the inside of it. But with this case, all, cleaning is a breeze. The front panel comes off giving you easy access to the dust filter which comes off and is easy to clean. With this, it was also very simple to attach the front fans.

    The tinted tempered glass is great for those who want to have a more muted build. But I think it would look great if there was some bright RGB.

    They give you the option to vertical mount your GPU if you want to have that look as well. Mounting holes are pre installed and the case also has vertical GPU IO options.

    One thing I would be concerned about this case is the front airflow. With the front panel being closed off, it will restrict some air coming in. If you want optimal airflow, Id suggest going for the 4000D Air flow. However, since the front panel is easy to remove, I'm not to worried about it. I like the look of the covered front panel and if temps get too hot, I can just remove the front panel no problem.

    Another minor problem this case has is the Front IO. It only has 1 USB 3.0 and 1 USB-C port. This may put off several people who needs devices plugged in at all times. But again, this isn't a big issue for me.

    If you're looking into getting this case, I'd highly recommend it. Its a very easy case to work with, looks great, and has a bunch of features. And for the price, I don't think you can beat that.

    Apr 28, 2021 16:58
  • Review by Good, 10 out of 10
    Good stuff

    Good stuff nice soft romantic i can really get up in there

    Aug 07, 2021 00:43
  • Review by MJS11, 8 out of 10
    Sleek design with Corsair 4000D

    The sleek, clean, minimal look for the Corsair 4000D is certainly the highlight. And what I most appreciate is that if you want more airflow, then you can remove the front panel and boom: all the airflow you could possibly want. Not really any major complaints, except that you can tell this is oriented to those who use AIOs or custom water cooling. Fans on the top will not fit if you use a cpu air cooler, unless you rotated the cooler 90°. So definitely worth keeping in mind if thinking of using and air cooler. Other than that, no other complaints.

    Dec 11, 2020 17:34
  • Review by ItsDang, 10 out of 10
    Solid

    Built well case, simple cable management, and has nice magnetic filter on top.

    Aug 04, 2021 17:55
  • Review by lkcraig, 10 out of 10
    Sharp looking case

    Love this case. It has space, great cable management, and is very quiet. It looks amazing.

    Feb 21, 2021 17:41
  • 9.8score
    CORSAIR - 4000D AIRFLOW MidTower Case
    Description

    The CORSAIR 4000D AIRFLOW is a distinctive, high-airflow optimized mid-tower ATX case with easy cable management and exceptional cooling. A steel front panel offers optimal airflow to your components, accompanied by two included 120mm AirGuide fans that enhance cooling. CORSAIR RapidRoute design makes it effortless to route major cables through a single channel.

    8 Features
  • A Fitting Choice: Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, choose the 4000D for an immaculate high-performance PC.
  • High-Airflow Front Panel: High-Airflow Front Panel, An optimized steel front panel delivers massive airflow to your system for maximum cooling
  • RapidRoute Cable Management: CORSAIR RapidRoute Cable Management System Makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Two Included 120mm Fans: CORSAIR AirGuide fans utilize anti-vortex vanes to concentrate airflow and enhance cooling.
  • Extreme Cooling Potential: A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including a 360mm in front and 280mm in the roof (dependent on RAM height).
  • Modern Front Panel I/O: Modern Front Panel I/O Puts your connections within easy reach, including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: Fits up to 2x SSDs and 2x HDDs.
  • Tool-Free Tempered Glass Side Panel: Tool-Free Tempered Glass Side Panel Show off your high-profile components and RGB lighting.
  • 8 Most Useful Reviews
  • Review by Bobo, 10 out of 10
    Best Case I've EVER Owned!

    So I decided to upgrade my case due to some pretty bad thermals in my previous rig. The Corsair 4000 series looked very appealing due to it's attractive build and quality features. I originally ordered the 4000X but did some additional research that the glass front panel negatively impacted thermals. So the 4000D Airflow looked to be a good choice. It wasn't... It was a GREAT choice!

    The best features?

    1) Tremendous thermals. I was previously running in the mid 60's at max usage and had to run the fans at full speed to do that, making the rig noisy as all get out. With the Airflow 4000D I barely run the fans at idle and at max my temps are in the mid 50's! The lowest I've ever had in any of my pc builds!

    2) Love the cable management system! Very easy to use and I've never been this organized in the back of my desktop. In addition, I'm liking the shield to the right of the 24 pin connection so you can't see behind the motherboard. Also, it's nice to have space down below for my ssds, which also helps to hide wiring, etc.

    3) The front panel grid is great and it's nice that you can order an additional glass panel so you can switch out looks based on what you're using the desktop for. At idle, the glass panel works well and for only an extra $10, it's worth it.

    4) Plenty of spaces for extra fans. I already had a full set of six Corsair RGB fans so it was great they would all fit!

    5) The overall build quality of the case is top notch! It looks great and is sturdy and durable.

    A few minor issues:

    1) I would have preferred a glass door panel with hinges. Although the side glass panel is well built, when I go to close the side panel I always worry I'm going to break the glass when it snaps back in place. It's pretty tight to close.

    2) I would have preferred holes that were a few mms larger so I could have run my usb and fan plugs in spaces that were closer to their ports.

    3) I think the top shelf grid could have been laid out with better positioned holes for center mounting of fans. I was able to find a way to modify, but Corsair should have either centered the adjustable slots or not had them at all.

    4) As much as I like the vertical mount access, the backplates are positioned in a way where the GPU is way too close to the side glass panel, choking off air to the card. Just not a realistic positioning to keep a vertical GPU cool.

    5) It would have been nice to have had an additional USB 3.0 port on the top of the case and I do miss the cpu activity light.

    All in all I'm still very, very happy with this case and would recommend it to anyone who wants a great looking case that has some of the best airflow for it's size and price. Well done Corsair!

    Aug 11, 2021 00:49
  • Review by Nikki, 10 out of 10
    In love with this case!

    This case made it so easy for me, a beginner, to build my pc! It honestly came with more of a helping hand than I would have thought. I’m in love with my setup and the size is just perfect enough for each part without taking up too much space on my desk. The side panel is so perfect since it has a slight tint, helps hide any wire imperfections at the bottom, that way I can highlight the RBG parts!

    My only complaint is that there’s not as much space for the Corsair led/fan box in the back. I wish it were smaller or came attached already. I managed to stick in on in the back (comes with sticking tape) but if I want to remove the cables, I’ll have to remove and reattach it. Otherwise, the cable management is looking really great for a beginner like me. Lots of space in the bottom to place some wires. It also came with Velcro ties and zip ties, amazing!

    Oct 25, 2021 17:14
  • Review by Clyde1978, 10 out of 10
    Great case I bought 2

    I purchased 2 of these cases they met my expectations greatly. I wish Corsair would sell there case fans separately for buyers looking for that all black look.

    Be careful taking out of the box I broke one of my case legs taking it out of the box. Totally my fault just keep in mind the back two legs are held together with a metal screw on a plastic leg

    Oct 27, 2020 23:40
  • Review by Nathan, 10 out of 10
    Great case for the money. RTX 3090 approved

    Great case! I wish it came no window but still looks good. I needed a new case for my rtx 3090 so this was a good size. I also had the 5000D but it’s too big

    Nov 05, 2021 18:03
  • Review by Anonymous, 10 out of 10
    My fav case ever

    I’ve used this case on the last 5 pc’s I’ve built including my own , I love em, the compatibility for fans and coolers is insane , there’s plenty of room for wire management and even has 2 ssd bays on the back and also 2 3.5” hard drive bays as well , the magnetic dust filters on the top the front and the filter on the bottom to keep the psu clean is also a huge plus

    Aug 17, 2021 14:53
  • Review by Maksim, 10 out of 10
    Good case food airflow

    Pretty good case. Good airflow. Lacks the dust filters for back fans though. My cable management is awful.

    Look up the Gamers Nexus review of that item.

    Nov 07, 2021 12:25
  • Review by TopherRaym, 10 out of 10
    A great case to build in.

    This was a fun case to build in. Comes with 1 front and rear fan pre-built and front IO already cable managed. Plenty of zip ties, velcro, and SPACE to run every cable from the motherboard and power supply. It'll fit up to a 360mm radiator on the front and top. RGB go brr...

    Jul 27, 2021 14:18
  • Review by Firestick, 10 out of 10
    Lovin it

    Be warned if tou plan is to put a 360mm radiator at the top it wont fit

    Nov 06, 2021 02:26
  • 9.6score
    CORSAIR - 5000D AIRFLOW ATX Mid-Tower - Black
    Description

    The CORSAIR 5000D AIRFLOW is a mid-tower ATX case that shows off your PC, and not its cables. An airflow-optimized front panel delivers maximum ventilation to your system, while CORSAIR RapidRoute cable management makes it simple to keep cables hidden from sight. Two CORSAIR AirGuide fans offer directed airflow, and a motherboard tray with customizable fan mounts lets you install multiple 360mm radiators.

    10 Features
  • Clean and Cool: The 5000D makes a stunning, showpiece-worthy PC easy to build, and even easier to keep cool with the space and flexibility to mount multiple 360mm radiators.
  • High-Airflow Front Panel: An optimized steel front panel delivers massive airflow to your system for maximum cooling.
  • CORSAIR RapidRoute Cable Management System: Makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 25mm of space behind the motherboard for all of your cables.
  • Two Included 120mm Fans: CORSAIR AirGuide fans utilize anti-vortex vanes to concentrate airflow and enhance cooling.
  • Motherboard Tray with Customizable Fan Mounts: Side-mount up to 3x 120mm fans or up to a 360mm radiator, enabling new flexible cooling options.
  • Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front or side and a 360mm push/pull in the roof.
  • Modern Front Panel I/O: Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: Fits up to 4x 2.5in SSDs and 2x 3.5in HDDs.
  • Tool-Free Tempered Glass Side Panel: Show off your high-profile components and RGB lighting.
  • Removable Front and Roof Panels: For easy installation and cleaning of your components.
  • 8 Most Useful Reviews
  • Review by BDKS, 10 out of 10
    Perfect cooling

    This case is great. I originally used the Corsair 220T for my build but between the 11700k and 2070 super the inside quickly became an I’ve and the only mounting for my H150i elite capellix was front mounted. Upgraded to this case and had an immediate 10c drop in cpu and gpu temp. I have a total of 14 fans pushing air in and out of the case. If you game this is the case you want no question!

    May 22, 2021 23:43
  • Review by User, 10 out of 10
    Great case.

    Love the way the case looks and how easy it was to build in so much more room than my previous case.

    Sep 02, 2021 07:17
  • Review by Leeza41, 10 out of 10
    Beautiful and Roomy Case with Great Airflow

    This case is roomy and Beautiful!. My Pc stays cool with great air flow. My processor is a i7 11700K and asus XIII hero MB. I used this same case to upgrade my grandson's pc and I used 10 corsair LL 120 RGB fans . His case is more eye catching than mine with all those rgb fans. He absolutely loves his new case.

    Oct 09, 2021 19:43
  • Review by InflatableTRex, 10 out of 10
    Great choice for my first custom loop

    I bought this case to do my first custom loop build. Big fan of Corsair cases (recent ones). I previously was using a 4000d AF. Not a large footprint increase over 4000d compared to extra space inside. Lots of mounting options for all components, with thought put into making building/maintenance as easy as possible. For example: fans/rad are mounted to a removeable panel, adequate channels for cable mgmt, tons of included tie down straps, multiple options for ssd/hdd, etc. Build quality is great. Despite technically having room for 2 360mm rads, it gets a little tight up top. I ended up switching to a 240 on the top to make life easier. Someone more experienced might not have an issue with this though.

    Aug 13, 2021 16:08
  • Review by PCmadeMEbroke, 10 out of 10
    So bootyful ;)

    Absolute beauty. Ive never built a pc before so i just transfered everything from my pre-built and yolo'd it into the Corsair 5000d case. Super easy and spacious, case is very sturdy and the case actually has airflow bruh. It was a pretty penny tho 181.89 with taxes i think. There are similar or even better Airflow based cases in the market for cheaper but this one caught my eye. :)

    Jun 21, 2021 16:55
  • Review by Timmeh314, 8 out of 10
    Great Case All Around

    Great looking case with fantastic airflow and so many options. Only issue is trying to cable manage is a little difficult due to some weird layout choices. This could be because of the size of my GPU or not moving over the hard drive bay but overall I love it.

    Sep 16, 2021 15:16
  • Review by Slevy, 10 out of 10
    Best case hands down. Solved ALL cooling issues.

    Specs:

    - Ryzen 7 3700x w/ 240mm Corsair AIO.

    - Aorus 3070

    Had an AeroCool RGB and it was choking my system had CPU temps upwards of 77 degrees and GPU at 80+ under load, with fans maxing out. Got this case with no other hardware upgrades and I'm sitting at 62 C under load for 3 hours, with a GPU temp of 70 C. Completely open, screens everywhere, and super easy to open up.

    Cable management is made easy with the door to hide all of the cables.

    I would recommend if you are doing a new build - go with the 140mm fans. They fill in the areas better, but if you have 120's they'll be just fine.

    Oct 04, 2021 22:49
  • Review by Cam11, 8 out of 10
    Case

    The case looks really cool and has good air flow and also fits in areas a full tower wouldn’t be able to fit. But I fear I may have to upgrade to get more room and more power components in the future.

    Sep 05, 2021 09:10
  • 9.6score
    CORSAIR - iCUE 4000X RGB Tempered Glass Mid-Tower ATX Case - White
    Description

    The CORSAIR iCUE 4000X RGB is a distinctive and customizable tempered glass mid-tower ATX case with easy cable management and exceptional cooling, with three included CORSAIR AirGuide RGB fans.

    7 Features
  • Aclean start to a great build: As beautiful to look at as it is easy to build in, the 4000X RGB tempered glass merges elegance with innovation - the perfect starting point for a world-class build.
  • Tempered glass side and front panels: Show off your components and RGB lighting, with dedicated front ventilation channels for ample airflow.
  • Corsair Rapidroute cable management: Route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables, making a clean- looking build easier than ever.
  • Powerful directed airflow: Equipped with thress CORSAIR 120mm fans featuring AirGuide technology with anti-vortex vanes to concentrate airflow and enhance cooling.
  • RGB lighting: Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
  • Elegentaly versatile: Build it how you want today, with an easy upgrade path for tomorrow.
  • Compact yet efficient: Compact yet efficient, the 4000X RGB has excellent potential for expansion without being cumbersome.
  • 8 Most Useful Reviews
  • Review by Rosseroni, 10 out of 10
    Great airflow, amazing case

    This case is phenomenal. Not only does it have a very sleek design, it has great airflow with the included 3 front fans which blow out air from the front behind the front glass panel with side vents. Has lots of room for large components and also offers great cable management. Not to mention also the beautiful rgb fans and the corsair rgb commander!

    Jan 14, 2021 06:26
  • Review by TiCr, 10 out of 10
    worth the price

    Beautiful mid tower without bring too compact. air flow is good as well.

    Feb 13, 2021 00:30
  • Review by Voxy, 10 out of 10
    Perfect

    This case is genuinely amazing. The cable management for the pre installed fans were organized well in the back. The front panel is very easily removable. As well as the dust filters. I definitely recommend this to anyone going for a while aesthetic build. Be mindful about the size of your motherboard. I own the asus dark hero viii, and it was quite large. I had to install the corsair elite capellix cpu cooler away from the motherboard at the top. luckily, there are two areas to mount ur cpu cooler for problems like those. overall, amazing

    Feb 26, 2021 22:51
  • Review by Daniel96, 10 out of 10
    Love this case

    I’m going for a white build with this Corsair case but so far so good and it keeps my temps down and looks really minimalistic!

    Nov 05, 2021 17:25
  • Review by Cameron, 10 out of 10
    Great case

    Amazing and sleek case, providing great cooling solutions all while looking clean

    Oct 22, 2021 16:11
  • Review by Great, 10 out of 10
    Beautiful

    A beautiful case. Looks a lot different from the front in person.

    Oct 20, 2021 09:43
  • Review by etsui77, 10 out of 10
    white case

    loving the look and feel of the case also great airflow.

    Oct 18, 2021 13:59
  • Review by Hulasei, 10 out of 10
    Nice rgb

    Great purchase ! Rgb is really nice and comes with 3 fans!

    Oct 16, 2021 09:06
  • 9.6score
    NZXT - H710i eATX Mid-Tower Case with Tempered Glass - Matte White
    Description

    Build a futuristic new PC with this white a black NZXT mid-tower computer case. A built-in Smart Device V2 makes it easy to control the integrated LEDs and adjust the speed of the four included Aer F120mm fans. This NZXT mid-tower computer case has includes a cable routing kit that makes controlling unruly cords easy.

    11 Features
  • 7 drive bays: Include 5 internal 2.5" and 2 internal 2.5" / 3.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 2, 2 USB 3.1 Gen 1 and 1 headphone jack for installing peripherals.
  • Windowed side panel: Offers an unobstructed view of the case's contents.
  • 4 cooling fans: Include 3 front-mounted 120mm and 1 rear 140mm fans. Three 120mm top fan mounts allow easy enhancements.
  • Front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Enhanced cable management: Patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
  • Water cooling support: Allows use of multiple radiators of various sizes (not included).
  • Smart device v2: Includes a fast microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
  • Vertical GPU mounting: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically (PCIe riser card not included).
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by NateBVU, 8 out of 10
    Good tower

    Put a 3090 xc3 hybrid and a nzxt kraken 3 fan cooler in this thing. Will fit whatever build you want! Had to kind of jerry rig it together but you can’t tell the fans are screwed in to the wrong spots(fan screws didnt fit some spots). This was my 4th or 5th case I’ve used for a personal PC and found it mildly annoying at first to build with, but I am satisfied with the end result.

    Jul 20, 2021 16:25
  • Review by Jarhead, 10 out of 10
    Great case

    Great case. However, I had to flip the bracket upside down to top mount my Kraken X73. It wouldn’t clear the mobo and ram.

    Dec 21, 2020 10:00
  • Review by mande, 10 out of 10
    Solid Case

    Great case, I enjoyed building in this case. It has solid cable management lines and the smart device was easy to work with once you download the CAM software. The LED strips that are pre applied are also pretty cool and provide a nice way to show off your components that isn't too over the top.

    Oct 15, 2021 13:35
  • Review by Aladdin, 10 out of 10
    Best of both worlds

    This case has truly been amazing. The h510 elite was a case I was eyeing but the thermals on it are quite bad but I loved the look of it. Then I come across the h710i and it was a blend between good thermals and an amazing look. The h710i was an ease to build in and has been doing great so far and the build quality is awesome!

    Jan 17, 2021 00:00
  • Review by Deee, 10 out of 10
    Perfect

    Everything I need. Very happy with this purchase. Would recommend.

    Jul 20, 2021 08:20
  • Review by Rumskey, 10 out of 10
    Nothing better then the Red/Black

    Best PC case there is. There is no best case then this.

    Jun 23, 2021 13:09
  • Review by ADTQ7, 10 out of 10
    H710i

    Case is such a beauty to look at once it's complete. No regrets or complaints.

    Apr 24, 2021 19:07
  • Review by CD123, 10 out of 10
    Giving it a shot

    Let’s see how this build goes! Looks like decent spacing. Not sure how good airflow will be.

    Jan 22, 2021 16:23
  • 9.6score
    NZXT - H510i Compact ATX Mid-Tower Case with RGB Lighting - Matte White
    Description

    Build a customized PC from scratch with this NZXT compact mid-tower. The front-facing USB-C connector offers easier connectivity to smartphones or external storage, while the cable management system includes pre-installed channels for intuitive wiring. This NZXT compact mid-tower features a tempered glass side panel to showcase your build and has dual fans for optimum airflow.

    12 Features
  • SECC steel construction: Provides durability for long-lasting use.
  • 6 drive bays: Include 3 internal 2.5" and 3 internal 3.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 2, 1 headphone jack, 1 microphone jack and USB 3.1 Gen 1 for installing peripherals.
  • Windowed side panel: Offers an unobstructed view of the case's contents.
  • 2 cooling fans: Include 1 rear 120mm and 1 top 120mm fans. Two 120/140mm front-panel fan mounts allow easy enhancements.
  • Front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Enhanced cable management: Patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • Water cooling support: Allows use of multiple radiators of various sizes (not included).
  • Vertical GPU mounting: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically (PCIe riser card not included).
  • Smart device v2: Includes a fast microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by Mbrown117, 10 out of 10
    Looks great, easy build

    Good sized case, not too big but still very spacious inside - no wasted space. Very nice integrated cable management and the PSU compartment keeps the power cables out of sight. LEDs are a nice touch and the LED/Fan controller in the case works well although I opted to use my mobo. Window gives a great view to the fun parts and the rest of the case is very simple and understated. Overall it looks great and I'd highly recommend.

    One knock may be airflow on the intake side is a bit limited but that has not been an issue at all for me.

    Sep 04, 2020 17:12
  • Review by jrouse, 10 out of 10
    Great Value!

    Really good value. The CAM app for lighting control could be better, but otherwise it's a fantastic case.

    Oct 31, 2021 15:20
  • Review by Niterfx, 10 out of 10
    Great Mid Tower!

    This was the first tower i bought for my first PC build. I put a Atx Board with Corsair H100i AIO cooling and a GeForce 2070 Super FTW3 and everything fit well. Cable Manegment is awesome because it gives you all space you need for it. Even tho, i think it can be a little bit cheaper but not much.

    Mar 06, 2020 19:54
  • Review by emmury, 10 out of 10
    great pc case

    i recently built a new pc and this made it have a nice clean look

    Sep 25, 2020 15:50
  • Review by Kazszn, 10 out of 10
    Good case

    Very good case. Went from the Corsair crystal 280x to this one because the old case took up so much room on My desk. This new case allows me to display it on my desk and with the rgb strips it looks very nice.

    May 06, 2021 23:48
  • Review by Daniel, 10 out of 10
    NICE CASE

    Great case and Nzxt cam software has got to be the most user friendly interface etc going. Of your wondering about what the max size GPU thsy can fit in here, I was able to stick an RTX 3090 FE in the case no problem, although you would probably have issues if u were using a front radiator.

    Feb 20, 2021 08:33
  • Review by Zebedee, 10 out of 10
    Nice case

    Great case east to install my components. I like it comes with pre-installed led light in the case, you have to download the software to change the colors of the leds.

    May 22, 2021 08:31
  • Review by Db254tx, 10 out of 10
    NZXT H510i

    Great case. Bought this for my daughter for Christmas and was worth the extra for the i model. I bought the h510 snd ended up upgrading mine with the lights and fan controller and was almost double the extra for the 510i.

    Jan 22, 2021 16:09
  • 9.4score
    CORSAIR - iCUE 465X RGB ATX Mid-Tower Smart Case - Black
    Description

    Build a PC with this Corsair iCUE ATX mid-tower smart case. The expandable fan installation design and airflow layout reduce the risk of overheating, while multiple drive bays accommodate hard drives and SSDs for flexible storage options. This Corsair iCUE ATX mid-tower smart case features tempered glass side panels to showcase the components.

    8 Features
  • Steel construction: Provides durability for long-lasting use.
  • 6 drive bays: Include 2 internal 3.5" and 4 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 3.0, 1 headphone jack and 1 microphone jack for installing peripherals.
  • 3 cooling fans: Include 3 front-mounted 120mm fans. Two 120/140mm top fan mounts and one 120mm rear fan mount allow easy enhancements.
  • Top panel, front and PSU fan filters: Help maintain a dust-free interior.
  • 9 expansion slots: For adding graphics cards and other components.
  • Direct airflow path: Provides airflow to the hottest components without any interference from drive cages.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by cremesomyunggui, 10 out of 10
    amazing air flow

    I am honestly more happy with this case than I thought I would be, the airflow is absolutely amazing. I rebuilt an omen 30l in this case, ryzen 5 5600g/ rtx 3060/16g 3733mhz ram(with xmp on my mobo) and also replaced a bunch of other parts like the power supply and added water cooling as well as an MSI b550 gaming plus mobo. Anyways worked out great temps stay super low and im absolutely thrilled with it. I would totally buy this case again, the only negative i could see is if you do care about fan sound it is a little loud depending on how you build it as the airflow is just that good that it sounds like an actual fan. I imagine you could change that tho if you cared by using "silent fans" instead and maybe setting up the flow differently than I have it. Also lastly with the included fans and lighting node thing its a pretty slamming deal considering thats like 100 bucks if bought al;one.

    Oct 16, 2021 15:53
  • Review by SabotDart, 8 out of 10
    Great case, Nice air flow.

    Priced very well considering the fans alone would cost 120+. This case comes with 3 LL120 RGB fans and a Lighting Node Core. The Core only controls the fan lighting, so you need at minimum 3 PWM 4pin fan headers on your motherboard or a PWM fan controller. I already had 3 LL120 fans So I installed a Commander Pro to control lighting and fan Speed. Cable management will take some time there is not a lot of space behind the tray like some cases. I feel the radiator cut out at the front of the PSU shroud could be larger so users can fit a 360 radiator in a push/pull configuration.

    Sep 21, 2020 12:55
  • Review by KadesChaos, 10 out of 10
    Durable case

    Really nice case! All of my parts fit great and the back was big enough for all my cable spaghetti! The glass is thick and sturdy too!

    Apr 17, 2021 17:35
  • Review by JonB, 8 out of 10
    Great case for liquid cooling

    Bought this case because my old one couldn't fit a 280mm radiator. This case allows for front or top install and larger sizes.

    I also purchased because I needed new fan cases and these look and work great!

    Only reason for 4 stars is I wish there was a little bit more room for cable management in the back.

    Apr 17, 2020 16:28
  • Review by DevonC, 10 out of 10
    Fantastic Case w/ fun and easy to use RGB

    So far everything about this case has been great. The cooling works perfectly with easy to manage air flow. There is plenty of room for fan installation and customization throughout. I am using a 240mm Corsair h100i platinum RGB on the top of the tower and it looks great. The RGB is really fun to play with via the Corsair iCue hardware/software which is super easy to use and came preinstalled with the case. Highly recommend to anybody looking for an RGB mid tower that is high quality overall.

    Mar 13, 2020 15:17
  • Review by IanM, 10 out of 10
    Another solid case by corsair.

    Solid case by corsair. Has plenty of mount points in the back to anchor cables, plenty of room for spare equipment and hard drives.

    Seems to breathe pretty well. May not be the easiest to dust out when the time comes.

    Aug 05, 2021 18:04
  • Review by Domz, 10 out of 10
    Nice Looking Case

    Updated to this case from an old Inwin 101 case. Fans look great and its nice to have a glass front that actually allows some air flow. Would be nice to have a bit more room for cable management in the back, but its good enough.

    Sep 04, 2021 15:02
  • Review by Zepher, 10 out of 10
    Awesome looking case with LL120 fans

    Elegant looking case with LL120 fans at an affordable price.

    Buying the fans alone is nearly the cost of this case with the fans.

    I ended up buying 2 of these cases and pulling the LL fans from the second one to fill up my first one.

    I gave the second case to my dad and put some inexpensive RGB fans in it for him.

    Jun 18, 2021 17:46
  • 9.4score
    NZXT - H510 Elite Compact ATX Mid-Tower Case with Dual-Tempered Glass - Matte Black
    Description

    Build the ultimate PC with this NZXT H510 Elite compact computer tower. Two powerful fans and multiple filters help keep sensitive components cool and free from dust and debris. This NZXT H510 Elite compact computer tower provides plenty of space for installing components and has two tempered glass panels that show off your build.

    11 Features
  • 6 drive bays: Include 3 internal 2.5" and 3 internal 3.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 1, 1 USB 3.1 Gen 2 and 1 headphone/microphone jacks for installing peripherals.
  • Dual-tempered glass side panel: Offers an unobstructed view of the case's contents.
  • 3 cooling fans: Include 2 front-mounted 140mm and 1 rear 120mm fans.
  • Front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Cable management: Lets you easily route cables for enhanced system airflow.
  • Water cooling support: Allows use of multiple radiators of various sizes (not included).
  • Smart device v2: Includes two HUE 2 RGB lighting channels, and three fan channels that support 0dB modes for voltage-regulated or PWM fans.
  • NZXT CAM app: Use the intuitive application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by AlxB, 10 out of 10
    NZXT CAM Ftw

    The case it self is fine, however comma.. the NZXT software in this thing is A M A Z I N G. Paired with other NZXT fans and coolers, there’s so much control and is x10000 better thang razor synapse.

    May 19, 2021 08:54
  • Review by TimeToPlay007, 10 out of 10
    Best Case ever

    At first I was scared to buy but i gave it a try and all i can say its beautiful case. Doesn't take too much of space and wire management is just easy.

    Feb 21, 2021 11:01
  • Review by Nexus, 10 out of 10
    Excellent

    Excellent Case, solid, beautiful, RGB is the best I've seen, I've had the corsair before, model 4000X RGB, which is very good, but the NZXT 510 Elite is better and more beautiful. only for $16,00 Dollars More than the Corsair.

    Oct 29, 2021 16:44
  • Review by potatoecake, 10 out of 10
    Pretty!

    Beautiful case. Edges and built quality is there.

    Nov 05, 2021 16:55
  • Review by Nzxt, 10 out of 10
    i love it

    i build my first computer so i like this case it’s awesome

    May 02, 2021 12:59
  • Review by SunglassMan, 10 out of 10
    Fantastic Case, A Little Pricy But Great On Sale

    The case had way more workable room than I was expecting and I am thrilled with how much airflow I can get out of it. I upgraded from a pre-built I got from BestBuy years ago and I'm getting so much more out of my rig while also looking way cooler, couldn't be happier!

    Apr 04, 2021 23:15
  • Review by Bossman, 8 out of 10
    Looks awesome, lacking PWN fans and a bit tight

    This is the case I currently use for my gaming rig, and I have a 280mm Corsair RGB Platinum cooler up front. It look awesome behind the glass panel.

    My biggest gripe with this case is that for the money, I would have expected PWM fans to be included but both the 120mm and 140mm case fans they include are only 3-pin DC fans, so they run louder than I would like. I ended up replacing them with Corsair LL120 fans anyway as I wanted RGB, but I was hoping to be able to re-use the stock case fans somewhere else, but DC fans are not much fun as they are usually too loud.

    One thing I find strange is that on the NZXT web site, they specifically sat it comes with their Aer 120 and 140 fans that are supposed to be PWM?

    Other than that the main issues I have with the case is due to the size, it's a bit tight to get cables nicely managed and with the lack of room up top I was unable to use a 140mm fan up there due to the 12V ATX power supply connector. The stock case fan just barely fit, but Corsair LL140 fans which are a bit taller won't fit. So I ended up with a 120mm fan up top.

    Jan 03, 2020 16:30
  • Review by prdaboy, 8 out of 10
    Great start

    The glass front looks great would consider to anyone looking to build a pc great rgb! Nzxt wins again

    Aug 26, 2021 08:06
  • 9.4score
    NZXT - H510 Compact ATX Mid-Tower Case with Tempered Glass - Matte Black
    Description

    Create a robust tailor-made desktop with this NZXT H510 compact mid-tower ATX case. Two Aer F120mm fans are integrated for optimum internal airflow, and the front panel and PSU intakes consist of detachable filters. This NZXT H510 compact mid-tower ATX case comes with a cable management system that allows easy installation and expansion.

    9 Features
  • 6 drive bays: Include 3 internal 2.5" and 3 internal 3.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 1, 1 USB 3.1 Gen 2 and 1 headphone/microphone jacks for installing peripherals.
  • Tempered glass side panel: Offers an unobstructed view of the case's contents.
  • 2 cooling fans: Include 1 rear 120mm and 1 top 120mm fans. Two 120/140mm front-panel fan mounts allow easy enhancements.
  • Front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Enhanced cable management: Patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • Water cooling support: Removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by DarkSydeMaverik, 10 out of 10
    What and easy way to build a PC

    I was looking to upgrade the case for my rig for a few months and couldn't decide which one to use. Aftwr upgrading my desk setup i went with this case for its simplicity, the wide open side panel to view all the components, and ease of upgrading.

    I must say, building in this case was EEEEAAAASSSYYYYY. This was only the second time ive built a PC and i don't know how i was able to build in the janky old case i had before.

    There are plenty of wire ties included, wiring that fits into the hokes easily, and the channels on the back panel jeep it all tucked away nice and neat.

    This is a MUST buy for anyone looking to begin building a PC.

    Oct 08, 2021 17:45
  • Review by leogps, 10 out of 10
    Sturdy and aesthetically pleasing

    I had upgraded my tower from yesteryear model to NZXT H510. I must say that this is very convenient to access anything on the motherboard as the SSDs, HDDs and PSU(SMPS) are tucked away to the other side (in the bottom cage).

    Co-incidentally everything I have including, motherboard, heatsink, RAM, Graphics Cards are all Black/Red. So this case aesthetically pleasing.

    Without water cooling and a fairly high degree of overclocking the CPU, the temperatures are still don't go over 70 degrees, very well thought out airflow and impressively designed chassis with plenty of vents.

    Jul 24, 2020 18:09
  • Review by Anonymous, 10 out of 10
    Good case for a build

    I recently chose this case for my build. Worked well with my build and didn't have any problems. Only problem was taking off the front glass panel, but that was easy fixed by pushing out the panel from the inside. Just take off the back cover and push it from the inside. Other than that 5/5.

    Feb 23, 2020 11:49
  • Review by Levire, 8 out of 10
    Beautiful case - quiet, clean, minimalist

    I just bought this case for my new Ryzen 5 2600X build. Right away I could tell that NZXT designers really thought this case design through. I found the case to be intuitive to work with. The finished build is great looking and very functional.

    The cable management solution is very nice with the velcro straps for the main PSU cables and tons of anchor points for zip ties for other component wires like fans, etc. All of the cable mess is behind the motherboard panel and totally out of view even if you do a poor job with cable management.

    The stock case fans were quiet, but I replaced them with my Corsair LL120 fans for top and rear exhaust, and two Corsair ML120 fans for intake.

    The tempered glass panel is beautiful and mounts with only one thumb screw. This makes access to the inside very quick and easy. Just be careful as removing the panel can be tricky, and it is glass. The wire management side attaches with two thumb screws and is also easy to work with. I did, however, replace all the thumbscrews with better anodized versions. The stock screws are plastic gripped ones and looked cheap.

    This case is very much worth the money over the low budget cases. I would definitely recommend it to a friend for any workstation or gaming machine within "normal" spec and moderate overclocks. If you plan to go nuts with overclocking components you may want to spend a little more for a case with more airflow or use water-cooling.

    Dec 13, 2019 18:39
  • Review by battletag1155, 10 out of 10
    Excellant case

    Pictured is the first one I bought, *It runs my TV. Just bought a second one today. I really like this case.

    MCSE and CompTIA certs.

    *Because I haven't found a Smart TV yet that is as versatile as Windows 10.

    Jul 29, 2021 22:31
  • Review by Jordevos, 10 out of 10
    Great Budget Case

    Perfect for what I needed it for. Built a new PC for work and needed something cost effective, not too large, and decent cooling. This case checked all the boxes for me. I'm using a 240mm AIO mounted to the front with an i7-11700k and the temps never get above 35 degrees. Please keep in mind I'm using this for Adobe Suite tasks and don't game so I'm not stressing the CPU that much to begin with. But I do feel there are some limitations to cooling if you are planning on air cooling.

    PROS

    - Great Looking Case, love the White/Black Contrast

    - Great Cable Management - plenty of space and dedicated channels for cable management in the back.

    - Plenty of space to work in front (I'm using a Micro ATX motherboard) and found it to be the perfect size for tucking cables and making it look clean.

    - Comes with 2 Case Fans

    - Removeable front bracket for easy AIO installing

    CONS

    - I wish the top of the case was vented across the entire top, so you could top mount an AIO. There is only one small vented cutout to fit the pre-installed 120mm fan at the top for exhaust.

    - The top venting comment was me just being picky because at this price point, there isn't really much to complain about.

    I'm sure there are better airflow cases out there around this price point but if you're planning on using an AIO, that shouldn't matter too much. And if you're not building a super high-end system, this really is a great case. I absolutely loved building in it.

    Jul 15, 2021 15:24
  • Review by JP1971, 10 out of 10
    Excellent PC case

    My 13 year old son was building his first PC and this was the case he chose. He did all the research and figured out the NZXT - H510 would be suitable for his project. It is very well built and solid, the tempered glass is cool so you can see what’s inside.

    Apr 27, 2021 15:07
  • Review by David, 10 out of 10
    Solid case

    Great case for just about any build. It can get a little tight in some places with a full size ATX build. But still a very solid case.

    Jul 02, 2021 10:47
  • 9.2score
    CORSAIR - iCUE 4000X RGB Tempered Glass Mid-Tower
    Description

    The CORSAIR iCUE 4000X RGB is a distinctive and customizable tempered glass mid-tower ATX case with easy cable management and exceptional cooling. Two tempered glass panels and dedicated front ventilation channels combine to offer great looks and airflow. Three 120mm AirGuide RGB fans concentrate cooling and illuminate your system, controlled by the included iCUE Lighting Node CORE. The CORSAIR RapidRoute cable management system makes it effortless to route major cables through a single channel, with 25mm of routing depth. The 4000X RGB offers all the space you need for excellent cooling and storage, with room for radiators in sizes up to 360mm and four storage drives. Complete with a modern front I/O panel including a USB-C port, the 4000X RGB makes great cooling and clean looks easier than ever.

    8 Features
  • Make it Personal: Combining stylish tempered glass, customizable RGB lighting, innovative cable management and concentrated airflow, choose the 4000X RGB for a unique high-performance PC.
  • Tempered Glass Side and Front Panels: Show off your components and RGB lighting, with dedicated front ventilation channels for ample airflow.
  • CORSAIR RapidRoute Cable Management System: CORSAIR RapidRoute Cable Management System Makes it simple and fast to build an immaculate, professional-looking system with major cables neatly routed through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Three Included 120mm RGB Fans: CORSAIR AirGuide RGB fans utilize anti-vortex vanes to concentrate airflow and enhance cooling Each fan is equipped with eight individually addressable RGB LEDs for brilliant lighting
  • Smart RGB Lighting out of the Box: Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
  • Extreme Cooling Potential: A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including a 360mm in front and 280mm in the roof (dependent on RAM height).
  • Modern Front Panel I/O: Modern Front Panel I/O Puts your connections within easy reach, including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.
  • All the Storage You Need: All the Storage You Need Fits up to 2x SSDs and 2x HDDs.
  • 8 Most Useful Reviews
  • Review by MasterDurandalsTopFan, 6 out of 10
    Decent case, decent airflow, iCue bad

    Decent case, I enjoyed that it came with the three 8-LED fans in the front plus a node inside the case to connect those fans to. Easy to build in for the most part, and the design of the case looks very nice.

    Their glass side-panel mounting solution could be better, the side panel feels pretty much suctioned to the case which caused me to shatter my first one (super fun) and always gives me resistance so it can be dreadful to take off for getting inside the PC, which is obviously necessary.

    My real gripe lies on the other side, towards the back of the MOBO. I'm running the 850W PSU from Corsair, and the cables are so thick (mainly the 24-pin) that even pressed all the way against the back of my case, it still causes the outer panel to bend, and (not trying to flex) my cable management inside the case is pretty much flawless. Rather ironic I would say, that I pair a corsair PSU with a Corsair Case, and their cables won't even fit in the back panel properly, which makes adding cable extensions or extra fan headers to this case pretty much a nightmare.

    Also, I know this is a common thing for RGB fans, but the double wires for one fan (one for RGB and one for actual fan control) is a little ridiculous. If you're mix-and-matching fans from Corsair, like me (one LL fan, and five 8-LEDs) you (might) have to get an extra node/header to control them since they use one fan to tell the others what to do, or else the RGB won't work properly on one series of fans (I could've planned for this better, but really).

    You might know this, but iCue can be pretty awful. Most recently, I was having an issue where my fans connected through a Commander Pro would go on and off every 5 seconds and a USB-disconnect sound would sound every time the fans would turn on and off, and my fans would go full-throttle when it happened. I fixed it by disabling some USB setting, but most of the forums I visited said it's an issue with other programs interfering with RGB control, so take that as you will.

    THERMALS AND NOISE PERFORMANCE: I'm running a Gigabyte 2080 super and an i7-9700K (stock OC, same voltage) with a h100i Elite Cappelix 240mm AIO mounted at the top of the case (there's an option for 280mm but my RAM, corsair vengeance RGB, barely had clearance with the 240). My CPU never goes above 65 degrees and same with my GPU, so I can't complain about that.

    Under load, I would say the noise level is alright, it can be quite loud but the tone of the noise isn't unpleasant. Compared to something like the jet engine of a PS4, this is way better, it just sounds like a really big fan blowing wind without any mechanical noises or whirring, so I would say a clean sound.

    PROS:

    - RGB looks nice especially with smoked panels, overall very sleek-looking case

    - Decent-good airflow and performance.

    - Relatively easy to build in.

    CONS:

    - Area behind MOBO for cable management is too small for Corsair PSU cables, bends my side-panel even without stacking wires + good cable management.

    - iCue is not good

    - Glass side-panel mounting needs improvement, can be annoying

    - If running with Corsair fans, LOTS OF WIRES

    In short: I love the way it looks and it performs well, but for individuals who are less experienced, it can be quite tedious to deal with Corsair's software if pairing with other Corsair peripherals. If you're not looking to build with Corsair fans, go find another case 100%! Be wary of pairing with a PSU that uses thick cables.

    May 31, 2021 11:31
  • Review by Tnguyen, 10 out of 10
    Nice box

    Awesome box. Very easy to install. Use with Asus x299 gaming 2. I-9 10980ex.

    Feb 26, 2021 15:49
  • Review by Custom, 4 out of 10
    My custom pc build

    If my front panel didn't arrive with the right side clips broken I would have a higher rating, aside from that was super easy to set up and install everything

    Mar 20, 2021 12:37
  • Review by Scott, 2 out of 10
    Cheap plastic bezel

    Opened mine today to find the plastic bezel around the front of the case was loose. When I removed it I found that all the tabs on one side had either broken off or were bent. Looking at the bezel it isn’t reinforced very well which is ironic because it acts as the two front feet of the case so it’s job should be to withstand weight/force. The rest of the case is great and seems sturdy but the bezel just ruins the whole thing. I expected a lot better for $135

    Feb 17, 2021 21:04
  • Review by BonemanJones, 10 out of 10
    High quality great looking case

    Extremely nice looking case. Airflow is average, if you'd like better flow the 4000D is the case for you, it just doesn't look as nice. And that's what this case is about. Looks very nice especially with 6 RGB fans (only includes 3). Build quality is top notch. No cheap plastic to be found. A little on the pricey side but you get what you pay for.

    Dec 25, 2020 23:28
  • Review by Weston, 10 out of 10
    WORST REVIEW EVER

    I love this case! Great airflow! The tint hides all the stuff you don’t want to see. RGB SP fans. It also can accommodate the biggest graphics card that’s made. RGB SP fans. Did I mention fans? Not a bad deal with the fans! RGB fans work flawlessly with Icue. I paired that up with some RGB Corsair Vengence, and Corsair Lux 240mm AIO. It looks like a pawn shop in Vegas. I love it! Here’s the bad. The front panel shattered and not just a little bit. It was a huge mess to clean up. My wife was politely, very upset. I was very gentle in pulling too. I suggest that you pull from the top and bottom of the panel. I pulled from the middle and I was left with nothing in my hands. Crazy!! I highly recommend this case. I used this for my wife’s build and I went with the 4000d airflow, after having terrible cooling issues stuffing everything into a 280x. Merry Christmas everyone! I’ll be dropping 20 bombs in the Warzone @ 143fps in 1440p thanks to BB!

    Dec 11, 2020 16:38
  • Review by hahanson, 10 out of 10
    Stylish and Solidly built.

    Quality build, reasonable price. Room for a mid-tower with space for a 240mm and 320mm radiator. Good cable management.

    Glass front panel gives a high-end look, but if you need airflow go for the 4000D as the glass panel restricts airflow. It's still decent, however, and Corsair's ecosystem for RGB is second to none. Plan on spending a little extra and getting a Commander Pro to make life much easier.

    Jun 12, 2021 20:51
  • Review by Moon, 10 out of 10
    Good design,

    Great casing. Silent fans, a 3-fan AIO up-to 360mm can be installed on top-side which has a magnetic sheet which you can just lift and screw the radiator without having to dismember anything at all.

    Some people might suspect that the radiator or fans of AIO might get stuck in ram but this is not the case. It still has more than 2 inches of gap so you can plug in/out cables pretty easy right under it.

    The front panel is glass so an AIO with outward airflow at the front is not recommended. Its great for inward flow however, since it pulls air in from gaps on the side.

    Right now, I am getting 35~39 degrees on my 5800x processor while there is no load on it. (iCUE image attached)

    I did not feel the need to buy a modular PSU since it was easy for me to just hide unused cables behind PSU box.

    It has its own Corsair ARGB controller at the back. Came with pre-installed corsair branded straps and some extra ones, zip ties, all mounting screws and easy to follow installation manual.

    The side glass is darkish but you can still see pretty much everything inside once its turned on. Its more of a personal choice, since i like darkish glass which gives it its own feel.

    Overall, I am glad that I bought this casing and its worth it for 130 dollars imo.

    Sep 09, 2021 00:23
  • 9.2score
    CORSAIR - iCUE 220T RGB Airflow ATX Mid-Tower Smart Case - Black
    Description

    Build a PC system using this Corsair iCUE mid-tower ATX smart case. The high airflow layout and three 120mm RGB fans ensure optimal cooling, while the tempered glass side panel lets you show off your components. This Corsair iCUE mid-tower ATX smart case features flexible storage options with dual 2.5-inch bays and two removable trays.

    7 Features
  • Steel construction: Provides durability for long-lasting use.
  • 4 drive bays: Include 2 internal 3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 3.0 and 1 headphone/microphone jacks for installing peripherals.
  • 3 cooling fans: Include 3 front-mounted 120mm fans. Two 120/140mm top fan mounts and one 120mm rear fan mount allow easy enhancements.
  • Top panel, front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by Justanotherpcnerd, 8 out of 10
    Very good replacement.

    My old case was huge compared to this, couldn't fit on my desk and had broken cosmetic parts here and there. I hardly ever use the read/write internal disc drive anymore so not having a place for that in the case was not a problem. I really like this case. I think it's perfect for a simple build. It fits my full ATX motherboard with a Master Cooler CPU cooler just fine. My power supply sits under the cover at the bottom and makes it look clean concealing the cords with it as well. It only comes with 3 fans so I mounted one at the front for intake and my HDD, one on the CPU radiator and one on the back. Doesn't come with software but finding it online was easy. The RGB fans are easy enough to install and move around. The software allows you to make them bright or dim and any color you want. I've had it for about a month now and the only minor draw back I would say is the filter. The filter stops most dust but not all but hey my last case didn't have one so this is a huge upgrade. I also like how easy it is to remove and clean them. The only other possible downfall I could see with this case is the front panel. The panel is metal with four nubs that each snap into a plastic part. I could see them wearing out from cleaning the front filter often but only after a long time of doing so.

    Dec 20, 2019 20:13
  • Review by jdalbright, 10 out of 10
    Great Case! a few notes tho :)

    Absolutely great case! One of the big motivation factors for choosing this case was that it came with the 3 iCUE rgb fans (those are valued at nearly the price of what I paid for the case ~$90). As with all ATX cases, there's no space issues even with the new monster GPUs. One interesting point was that I needed to take the 3.5 HDD bay enclosure out of the case to get my fully modular PSU into the case - this was no big deal for me since I'm using 1 TB NVME m.2 and 1 TB ssd SATA. The tempered glass is great, the looks is great, there's tons of space, the airflow is fantastic. One other thing I think you should know is that with my GPU, I had a tough time getting the HDMI cable to fully seat due to the proximity of the GPU output port and the divider between the PCIe exterior ports ... Probably should include a pic to make it make more sense. Anyway - used a DP cable and all was well!! Hope this was a helpful review!

    Jan 15, 2021 17:43
  • Review by MarkD, 10 out of 10
    Great little case

    Smaller ATX case that works well. Comes with 3 SP120 RGB fans and a Corsair hub. My Strix 1080ti did not fit with the radiator at the front and placing the radiator on top was tight for the TridentZ neo RAM. Fits 2 fan GPUs just fine but bigger ones need some thought.

    Nov 07, 2021 18:23
  • Review by Gabriel, 10 out of 10
    Smaller than I thought it would be. And perfect

    My last corsair PC case was the 4000D. It was quite large and not exactly my favorite. This case fits my full size B550 motherboard. Plenty of airflow.

    Sep 21, 2021 16:43
  • Review by NewYorkDavid, 10 out of 10
    Awesome case

    Awesome case I was able to fit my 360mm Corsair radiator in the front it was a little challenge but it possible. I’m writing this review because I haven’t seen Anybody with 360mm in the front

    Jul 16, 2021 22:58
  • Review by tinman, 8 out of 10
    Tight fit looks good

    Looks like nice a case it is a thigh fit for the components though that could make room for some improvements like power connection still using cheep pin cabling for power and reset power LED this is my first build for lintel board and gaming board i would recommend to friend or family member for the case the lighting is for effects and really not need its for vanity more than function i do new builds every 6 years i am not a gamer

    Aug 22, 2021 09:28
  • Review by Ford, 6 out of 10
    It's okay i guess

    its a okay case. if i could return it i would. sadly my graphics card does not fit. i have a 3060 TI asus rog strix. And now. a MSI 3070 Gaming X Trio. i have to take out the front center fan to get the graphics card to mount. which is not ideal if your into looks or max performance. Now it states you can mount a 240 AIO on top. i had to force it to mount. of course not breaking anything. Aside from that. it is a okay case. good cable routing.

    Oct 15, 2021 19:07
  • Review by NoWonder, 10 out of 10
    My friends nephew likes it...

    Nice case. Rgb fans look fantastic. Everythink fit well for me. Used an atx board with hyper 212 black cooler. Good cable management and placenents. Especially like the gromet coming from the basement. Came in handy on usb 3.0 plug placement on mobo i used. Definitely would use again for a build. Tech review twsting showed thatv3 front fans installed did pass the heat through the and back with just one rear exit fan.

    Apr 09, 2021 16:13
  • 9.2score
    19
    MSI
    MSI - MPG GUNGNIR eATX Mid-Tower Case - Black/Light Gray
    Description

    Build a powerful gaming rig with this MSI MPG GUNGNIR 100 ATX mid-tower case. Multiple drive bays provide expandable storage options, while the 4mm tempered glass side panel lets you showcase the setup. This MSI MPG GUNGNIR 100 ATX mid-tower case comes with front and rear fans and a flexible cooling layout to help prevent overheating.

    6 Features
  • 6 drive bays: Include 2 internal 2x2.5"/3.5" and 4 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 3.0, 1 microphone jack and 1 headphone jack for installing peripherals.
  • 4 cooling fans: Include 3 front-mounted 120mm and 1 rear 120mm fans. Three 120mm top fan mounts allow easy enhancements.
  • 7 expansion slots: For adding graphics cards and other components.
  • Cable management: Lets you easily route cables for enhanced system airflow.
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by William, 10 out of 10
    MSI - MPG GUNGNIR eATX Mid-Tower Case -

    Very nice Mid Tower Case.

    Wish it had a little better air flow.

    Aug 06, 2021 17:04
  • Review by Erubey, 10 out of 10
    MSI - MPG GUNGNIR BE COOL

    Hello,

    I have been with MSI - MPG GUNGNIR for more than 6 months, the RGB but it is not stentuous it is discreet I like it, especially that it has tempered glass I chose it for the cost benefit factor, the truth filled my expectations more than I expected very nice design with a super excellent price I would not buy one the same for that price. I loved how easy it is to do the wonderful cable management, I wish it had a part open to see the power source through the tempered glass.

    Mar 24, 2021 12:56
  • Review by CJmcm1979, 10 out of 10
    GREAT CASE

    Good case for the build I did fits everything perfectly

    Jan 22, 2021 23:17
  • Review by Atlas, 8 out of 10
    Pretty alright case

    Overall gave a pretty easy building experience, especially for a first time builder. Had some trouble finding enough Fan Headers on my botherboard and currently unsure of whether or not the HD audio is working despite being plugged in right

    Pros:

    Lots of space

    good air flow

    easy to control fan color

    Cons:

    Window is tinted too dark (Good that we can't see cables but would prefer more light coming out of it)

    Openings in case didn't make pulling through the 24 Pin Motherboard power bit all that easy to connect, especially with how short mine was

    Jul 23, 2020 19:09
  • Review by Ricanpone25, 10 out of 10
    Great working case

    Love the fans love the leds

    Love the space that this case has for building.

    So easy to work around, great for cable management it’s an amazing case.

    It’s more of a full size tower verse mid size tower.

    Overall for the money an amazing case.

    Jun 20, 2020 23:30
  • Review by David, 10 out of 10
    Love this case

    Msi did really well with this case. Fits up to a 360mm radiator on the top and up to a 400mm gpu/ graphics card. Has room for a total of 4 2.5” solid state drives and 2 3.5” hard drives all come with brackets. super easy for cable management comes with a back bar and velcro straps for cable management. 3 intake fans and 1 exhaust fan. Air flow is good haven’t had any issues with over heating on my rtx 2080 Ti. The rgb fan module is a +. Has dust filters in the front and bottom. the only down side to this case is the part where the power supply goes in. Super tight fit and make sure you order a modular power supply unit

    Dec 10, 2019 23:02
  • Review by Ruzty, 8 out of 10
    Great case, bad airflow

    This case is great for room and cable management, not so great on airflow for air cooled components. Also be careful of the tempered glass when placing it on the case, there is nothing really there to hold it on while you screw in the screws. I broke mine and MSI replaced it only because my local best buy didn't have it in stock.

    May 28, 2021 09:12
  • Review by Bobby, 10 out of 10
    highly recommended Tower Case

    best money spent. Plenty of space. Cable management is perfect. Tinted glass makes it look even better than clear. RGB hub works great on my z390 mother board. Cooling is perfect. Over all I recommend this case and hope to see some more from MSI.

    Aug 24, 2020 12:27
  • 9.0score
    Razer Tomahawk Mid-tower ATX Gaming Chassis with Razer Chroma RGB - Black
    Description

    Razer Tomahawk Mid-tower ATX Gaming Chassis: To build the ultimate gaming desktop, it begins with a frame that can support the performance within. Meet the Razer Tomahawk ATX—a mid-tower metal gaming chassis that exudes both form and function, equipped with premium features to accommodate your idea of a perfect rig, whatever it may be.

    6 Features
  • Dual-sided tempered glass swivel doors: Show off the true craftsmanship of your rig and performance of its Chroma-enabled hardware, as you swap out parts easily with rear-hinged doors that swing outwards and open without the need for tools.
  • Ventilated top panel and dust filters: The chassis not only vents heat from the rear, but the top as well, pulling in cool air from the front through built-in air filters that reduce the intake of dust particles.
  • Supports up to 360mm radiators: Whether you’re using an All-in-One (AIO) liquid cooler or a custom build, this gaming chassis is designed with enough space for you to maximize the cooling capabilities of your rig.
  • Front panel connectivity: Designed with a USB 3.2 Gen 2 Type-C port for faster connection with the latest devices, a dedicated mic port, a mic/headphone combo port, and 2 standard USB Type-A ports.
  • Built-in cable management: For an immaculate layout, the Razer Tomahawk Gaming Chassis offers cut-outs and covers to help route and hide cables that would otherwise restrict airflow or create clutter within the system.
  • Powered by Razer Chroma™ RGB: With 16.8 million colors and a suite of effects, sync up its underglow with the rest of your battlestation and enjoy greater immersion as it dynamically reacts with over 150 integrated games.
  • 8 Most Useful Reviews
  • Review by Recommended, 10 out of 10
    Highly Recommended Case!!

    This case is worth every penny. I'm a big fan of razer products and went from the Thermaltake level 20 GT to this beautiful case. Big difference in size and weight. Most people are curious about the airflow and as long as you have more than the one fan it comes with you'll be fine. This case is nicely designed and isn't heavy and bulky. I would recommended getting extra airflow in there if you're worried about overheating especially during gaming or graphic designing. If you have anything else razer it will sync up as far as RGB via Razer Chroma.

    Nov 08, 2020 15:46
  • Review by Ps4camera, 10 out of 10
    CPU case

    Love it just had to take it back lol because I thought it was the full cpu

    Jan 16, 2021 18:31
  • Review by MizMedusa, 10 out of 10
    Love it

    When I saw this beast I had to have it. There’s so much space and it looks sleek. It’s wire panels are nice. Easy to build my rig into. Love it. It is super heavy though beware.

    Oct 15, 2021 12:34
  • Review by DakotaC, 10 out of 10
    Pretty great case , HEAVY

    Great case , plenty of room for everything I had already, just a bit on the heavy side haha

    Nov 05, 2021 17:38
  • Review by gatorduckontech, 8 out of 10
    Not bad, but disappointing for the price.

    It's not a horrible case, it of course has reduced airflow compared to other cases on the market and overall I was kind of disappointed with the features for it being $200, but that being said it's still a good case - but changing the front panel, adding an extra side panel, and adding light strips to the bottom doesn't make it worth $200 (incase you're wondering what I mean, the case is very clearly based off the Lian Li Lancool 2 - from what I could tell all aspects of the interior of the case are identical, razer only changed the front panel and added the second side panel along with some other razer branding, and the Lian Li Lancool 2 is only $90 or so)

    Big negative about this case I'm going to put out real quick is the power supply basement is a bit crammed compared to like an NZXT H510 - and the harddrive cage is NOT intended to be removed, which doesn't make it easier.

    Nov 24, 2020 09:20
  • Review by GreatGeekSquad, 10 out of 10
    Razer Tomahawk Mid-Tower

    It is an excellent device and satisfactory in every way I needed.

    Oct 10, 2021 09:46
  • Review by AaronOculus, 10 out of 10
    Worth the Money

    LOVE LOVE LOVE!! Connects to my Razer synapse with all my devices!!

    Feb 20, 2021 07:47
  • Review by Hello, 6 out of 10
    It’s excellent case but....

    I’m a big fan of Razer and I really like the case and the case it wonderful but when I first time I bought I buy the opened box one and it was saying excellent condition but when I got it the dust fitter was missing, it was dusty and candy wrappers was inside of box, and DOOR WAS BROKEN!!!! SO IM POINTS ARE DO NOT BUY OPENED BOX ONE

    Apr 30, 2021 16:05
  • 9.0score
    Thermaltake - View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 x 200mm RGB Fans + 140mm Rear Fan - Black
    Description

    Designed to expand the legacy of the View Series lineup, the View 51 Tempered Glass ARGB Edition full-tower chassis features two 200mm 5V ARGB fans at the front and one 120mm 5V ARGB fan at the rear providing outstanding ventilation. This elegant chassis utilizes swing-out side panels, and is enclosed with 4mm tempered glass panels on three sides for users to demonstrate their DIY handwork and showcase their internal components. The I/O ports are positioned vertically on the right side of the front panel with tempered glass windows on its left. Different from other View Series chassis’, the View 51 TG ARGB can hold up to two 200mm fans at the front and on the top. With support for the latest PC hardware, the View 51 TG ARGB Edition is not only fascinating in appearance but comes with endless possibilities for PC lovers.

    8 Features
  • We’ve Got You Covered: Two preinstalled 200mm 5V ARGB fans at the front and one 120mm 5V ARGB fan at the rear.
  • Sync with Motherboard RGB Software: Designed to synchronize with ASUS Aura Sync (Generation one only), GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome.
  • Tempered Glass Window: The chassis comes with three 4mm tempered glass panels.
  • Smart Space Design: Sophisticated space design located on the right side of the case provides a neat area for PSU placement and cable management.
  • Vertical GPU Mount and Patented Rotational PCI-E 8 Slot: Specially designed with dual GPU placement options support for both vertical and horizontal graphics card layouts.
  • Dust Reduction: Two magnetic super fine fan filters with excellent protection and reduction against dirt on the right side and another easily removable filter at the bottom.
  • Airflow In and Out: Thanks to the dedicated design of the View 51 TG ARGB, the airflow within the case moves smoothly, ensuring the interior temperature stays low at all times.
  • Handy I/O Ports: Two 3.0 USB, two 2.0 USB, and one USB 3.1 (Gen 2) Type C port placed at the front-right panel to grant direct access when needed.
  • 2 Most Useful Reviews
  • Review by InfamousPrimeStreaming, 10 out of 10
    Incredible Room to Build

    Excellent PC case with so much room, gives you have the freedom to build & create your own environment with ease.

    The 200mm fans help keep my 3090 cool while playing on ultra settings. I added 2 more 200mm fans & 3 - 120mm fans just because I can with this case to keep everything cool. My GPU runs at 42°c (air cooled) after 4hrs of Games like Assassin's Creed Valhalla & Division 2 on Ultra Settings.

    I am very happy with this case and was a great purchase.

    Jul 16, 2021 16:36
  • Review by FlipToMyLou, 8 out of 10
    Great PC Case

    Great case to work inside of. I would have given it 5 stars if the back exhaust fan was a 140mm size instead of a 120mm but other than that aspect i think this is a fantastic case if you are looking for a big form factor case with good airflow.

    I added two 200mm fans at the top and 3 120mm fans on the bottom along with a noctua air cooler and everything had fit in perfectly.

    Aug 13, 2021 21:00
  • 9.0score
    GAMDIAS - TALOS ATX Mid-Tower Case - Black
    Description

    Create the ultimate machine for work or play with this Gamdias Talos premium desktop computer case. The colorful design adds a stylish look, while the spacious interior makes adding or removing components simple. This Gamdias Talos premium desktop computer case has three 120mm RGB dual-ring rainbow fans to keep hardware running cool.

    5 Features
  • Two drive bays: Includes two internal bays for 2x2.5" or 2x3.5" for installing a variety of components.
  • Front-panel ports: Include 2 USB 2.0, 1 microphone jack, 1 audio line-out and 2 USB 3.0 for installing peripherals.
  • 3 cooling fans: Include 3 front-mounted 120mm fans. Three 120mm top fan mounts, two 140mm top fan mounts, two 140mm front-panel fan mounts and one 120mm rear fan mount allow easy enhancements.
  • 9 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 4 Most Useful Reviews
  • Review by Onisama, 10 out of 10
    Outstanding and affordable!

    Great airflow, easy cable management and so much space for components of any size. RGB on it is so customizable for whatever color scheme you want and button to change the fan speed in the case. Fans are also extremely quiet

    Feb 04, 2021 18:47
  • Review by Roger1Roger, 10 out of 10
    great airflow and looks

    Love this case, tempered glass all the way around, except the back of course. It just looks amazing with the built-in LED strips at the edges. Great air flow due to the front glass design.

    Oct 14, 2019 13:09
  • Review by Mcdouglas, 10 out of 10
    Great product

    great product for a high performance computer and easy install

    Oct 16, 2021 15:31
  • Review by Khan, 6 out of 10
    It not worth it for the price tag.

    Solid built quality, But after a day or 2 LEDs all around the case started to glitch. I made sure all the wires were connected properly, but the problem wasn't solved.

    Nov 06, 2020 13:38
  • 9.0score
    Corsair - Carbide Series SPEC-DELTA RGB Tempered Glass Mid-Tower ATX Gaming Case - Black - Black
    Description

    Build a better PC with this CORSAIR Carbide Series SPEC-DELTA mid-tower gaming case. Featuring four 120mm cooling fans and a mesh inlay on the front panel, this case promotes airflow and helps prevent overheating. This CORSAIR Carbide Series SPEC-DELTA mid-tower gaming case has a tempered glass side panel that lets you showcase your setup.

    9 Features
  • Angular design: SPEC-DELTA RGB's steel chassis stands up to wear and tear, the frameless tempered glass side panel window shows off your system. The front panel features dark, angular accents that become transparent when backlit, offering a unique window into your system.
  • Flexible storage options: Include two combo 3.5"/2.5" trays in a removable cage, a 2.5" tray, and a 2.5" mount to provide a wealth of storage configurations.
  • External connectors: Two USB 3.0 ports and microphone-in/headphone-out combo jack for easy connection of peripheral devices.
  • Full-length PSU cover: Hides your cables and up to 180mm power supply out of sight, making immaculate builds easier than ever.
  • Built-in cooling system: Light up your system with three front RGB fans, each boasting six customizable RGB LEDs and controlled by ASUS, Gigabyte, or MSI motherboard software. One 120mm rear non-RGB fan also included.
  • Versatile cooling options: Four included 120mm cooling fans provide incredible airflow to cool your system, with room for up to a 360mm radiator in the front, 240mm radiator at the top, and 120mm radiator in the rear.
  • High airflow: The inlaid mesh on the front panel ensures ample airflow to keep your system cool.
  • Fully filtered: Dust filters in the floor, roof and front keep your system clean long after the build is finished.
  • Compatible with ATX, microATX and Mini-ITX motherboards: For use with a multitude of system configurations.
  • 8 Most Useful Reviews
  • Review by Kurt, 8 out of 10
    Good, solid case with good cooling.

    My only complaint about this case is that literally, the minute I finally put the removable sides back onto the case, the RGB light in the top fan stopped working. I have check the cabling and cannot find any disconnect between the fans and the motherboard. The bottom two RGBs work great.

    It's kindof ironic, I did not really want RGB lights, but bought the case at the last minute to assemble a PC before Christmas. After 11 years between builds, there was a learning curve. Asus VIBE controls the LEDS and the keyboard lights. The case is solid and quality built. I just can't give it five stars with an LED going out within a couple of weeks of purchasing the case.

    If anyone from Corsair would like to comment, I'd sure like to know if this is a known issue and/or if there is a replacement fan I can order, because I'm not taking the whole machine apart to get the case repaired.

    Feb 24, 2020 22:52
  • Review by Gamer217, 8 out of 10
    Good case over all!

    Great case for a first time builder. Only issue I have is cable management is tight! Easily fit my RTX 2060 Super. Only complain I have is that if i had chosen any other ram I may not have been able to fit the AIO in the top bc there is only about 2 mm of space between the AIO rad fans and the RAM. Other than that awesome case.

    Dec 29, 2019 20:02
  • Review by Gamingpcx, 10 out of 10
    Way better than expected

    Honestly I was not to happy when I bought the case, but this case is perfect, honestly if I only Knew how great it was, I would had bought it ages ago!!!

    Aug 31, 2019 18:13
  • Review by Swiftrick, 10 out of 10
    Great case

    Great case not compact or tight in my opinion everything sat just right

    great option for midtower Corsair case

    Mar 27, 2019 15:50
  • Review by Brokenledfans, 2 out of 10
    Broken LED Fan light

    The rgb fans literally don’t work :| I’ve tried everything and i can only conclude that they literally came broken.

    Jan 02, 2021 18:31
  • Review by JustinB, 10 out of 10
    Corsair Review

    It truly is a beautiful case and almost anything can fit into it. It is easy to build in and take apart. The airflow is perfect because it comes with 4 fans so there is no need to purchase any other to complete your build. Then to top it off. You can get it for under 80 dollars. You can’t beat it!

    Jan 01, 2021 17:23
  • Review by Sniper21, 10 out of 10
    Corsair rgb case

    Love the case. 4 120mm fans pre-installed. Can fit 140mm. Intake and exhaust fan speeds can be adjusted separately if you need more air. 3 rgb front fans all hooked together so you only need one rgb and one power plug to run them all. Don't have them yet but can put fans on top as well. Wires are all nicely hidden in behind. Everything fit great. One reviewer said his graphics card only left about a fingers width in front of the fans so check length of your going with a big card. Only think i would change maybe is the grating above the top intake fan could be bigger for more air but, might be just me.

    Jun 11, 2021 22:43
  • Review by nikilohiya, 10 out of 10
    Amazing Buy! Great heatsink and RGB Sync is great!

    This is an A-M-A-Z-I-N-G Buy!

    I bought this for my PC and this looks absolutely fantastic!

    The heat sink is amazing given 3 input fans and 1 output fan with a provision of 2 more if needed. The RGB is an absolute delight and extremely pocket friendly for people who want a budget PC.

    Dec 07, 2020 10:48
  • 8.8score
    Thermaltake - V Series ATX Mid-Tower Case - Black
    Description

    Assemble a desktop computer with this Thermaltake V100 mid-tower chassis. The 120mm fan and space for additional cooling options ensure optimal ventilation, while the expandable drive bay design provides ample storage space. This Thermaltake V100 mid-tower chassis has I/O ports on the front panel for easy connections, and the steel construction improves durability.

    5 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 6 drive bays: Include 2 internal 2.5" / 3.5", 2 external 5.25" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.0, 2 USB 2.0, 1 audio line-out/headphone jacks and 1 microphone jack for installing peripherals.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by TnoffApps, 8 out of 10
    It is a great case, but came defective.

    I got this case for a budget build. I had the entire pc built and was putting in the power supply, when I noticed that the metal where the power supply should sit was bent. We were able to bend it back down a bit, and we only could screw in 3 of the 4 screws for the power supply.

    Jun 16, 2021 12:01
  • Review by Allen808, 10 out of 10
    Does its job.

    Products okay in the sense where I got it just to get a cheap case to put my old build in. Since I could care less for RGB lightning, Its more of a setup and forget it kind of item.

    Nov 05, 2021 20:25
  • Review by Papaduck, 10 out of 10
    ATX case

    Bought two of these cases. One that I used to build a computer for my daughter and one for my son. Both my son and I are pleased with this case.

    Sep 17, 2021 15:39
  • Review by ImpartialRobot, 8 out of 10
    For the price, it works!

    It's a no-frills case that holds my full sized-atx motherboard. It doesn't have a ton of USBs in the front, nor does it have any cool LED effects...but it holds the components and a computer it still makes.

    Sep 06, 2020 14:19
  • Review by Good, 8 out of 10
    Good Product

    Worked pretty good.

    Air flow is good.

    Wire routing is difficult.

    Instructions on how to route wires is poor.

    Looks really sharp.

    Lots of room to add more fans.

    Nov 07, 2020 13:30
  • Review by Fietz, 8 out of 10
    Good Basic case.

    Nice case for my basic computer. Thermaltake is one of my favorite case makers.

    Jun 04, 2021 17:39
  • Review by OccasionalUser, 6 out of 10
    Cheap but Oak enclosure

    Not the best enclosure I have bought. But it got the job done. Paid less than fifty dollars. At the price paid, The two standard USB and one high-speed one at the front was the selling feature. Happy with the purchase so far.

    Mar 20, 2021 13:14
  • Review by Shieldmaidenjade, 10 out of 10
    First PC Build

    its a good case for a first PC build if you are looking for a frugal option.

    Oct 19, 2020 12:44
  • 8.8score
    CORSAIR - 110R ATX Tempered Glass Mid-Tower - Black
    Description

    The CORSAIR 110R is a minimalist mid-tower ATX case with a 4mm-thick tempered glass side panel and storage support for up to four drives, plus a 5.25in ODD drive bay. A 120mm fan is included for cooling right out of the box, with the potential to fit up to 5x 120mm, 3x 140mm fans, or multiple radiators for the cooling you need. Keep your build tidy with a full-length PSU cover that keeps your PSU and cables out of sight, and three removable dust filters to keep your system clean long after the build is finished. With a USB 3.1 front I/O panel for easy access to your favorite devices, the 110R has the essential features you need to build a great PC.

    7 Features
  • A Subtle Showcase: The 110R’s minimalist design ensures that your system can fit in almost any environment and displays your components through a beautiful tempered glass side panel.
  • Flexible Storage Options: Supports up to four drives for the storage options you need: two 2.5in trays and two combo 3.5in / 2.5in trays in a removable cage, plus a 5.25in ODD bay.
  • 120mm Fan Included: Ready to cool your components out-of-the-box.
  • Strong Cooling Potential: Fits up to 5x 120mm or 3x 140mm cooling fans or multiple radiators to keep your PC cool.
  • Full-length PSU Cover: Hide your PSU and cables out of sight, making immaculate builds easier to create than ever.
  • Keep Your System Clean: Removable dust filters in the floor, roof and front help keep your system clean long after the build is finished.
  • Up-Front Connections: A front I/O panel with two USB 3.1 Type-A ports and a combined microphone/headphone jack provides easy access to your favorite devices.
  • 7 Most Useful Reviews
  • Review by Hovo, 10 out of 10
    Great case

    Nice quality case. Needed a case quick and this was the cheapest corsair mid tier case i could get the fastest and its perfect

    Sep 17, 2021 22:23
  • Review by Lambda, 10 out of 10
    Corsair Case

    Its been a month using this pc case and its great!!

    Oct 16, 2021 09:04
  • Review by Dave, 10 out of 10
    Of Counsel

    Excellent cases. Built two new PCs using this case. Good size for ease in installing parts, cards and wiring.

    Jun 25, 2021 18:43
  • Review by Speck, 4 out of 10
    Wish I could return it

    A decent starter case if you don't need much airflow. I had to pop the front off to help cool things down. Things run hot even with my 3 extra fans.

    Oct 28, 2021 18:34
  • Review by Kawakji, 8 out of 10
    A nice little case for those who like simplicity!

    An excellent case for the price; good cable management, very easy to both disassemble and shift around its modular bits and pieces, lightweight for easy maintenance, ample fan space. A few caveats, however; The dust filtration capabilities of this case are almost zero. There's a little magnetic pull-away filter on the top-mount fan port and a pull-out filter for the bottom port, but the all-important front fans which are normally set to an intake role have zero dust filtration at all; with the way they're structured, you would have to finagle an aftermarket solution with a 3d printer or something. Either that, or reverse your fans' directions so that the case circulates air out the front. Other little things: The I/O ports are top mounted, so you're gonna want to invest in some plugs to keep those free of dust and debris in the long term while they aren't in use. (You can 3d print 'em, you can have some else print 'em for you, you can buy 'em by the bag of 24 for a pittance.) The single combination mic/headphone jack lacks sufficient intelligence to identify when you're plugging in a lone microphone as opposed to a headset with a microphone, so if you tried to use that port with, say, a dedicated mic on a stand, your system would probably mute your speaker outputs, thinking it's seeing a headset where there is none.

    I would say that if you dust your case out often (as you should), this case'll treat you just fine for a good long while—at a great price point, to boot.

    Sep 17, 2021 23:30
  • Review by Anton, 10 out of 10
    A nice lower end case.

    This is a very beautiful case. I wish I could get the white, but my room has animals and I just didn't think it would stay looking clean for long. The black which I got looks good too though. Most clear sided cases are not actual glass they are plastic. I didn't want to spend a lot on a case, but they don't have a ton of options for lower end cases. This was a little more than I wanted to spend, but I do think it is worth it. I love the filters on the fan mounts.

    Aug 26, 2021 17:57
  • Review by FriscoSteve, 8 out of 10
    Nice case and good price.

    Nice case but no disk activity light. Price was right.

    Sep 24, 2021 17:44
  • 8.6score
    26
    MSI
    MSI - MPG SEKIRA eATX Mid-Tower Case - Black/Silver
    Description

    Showcase your powerful and high-end PC with this MSI MPG SEKIRA 500X gaming chassis. Optimized airflow is ensured via two fans on the front to draw air evenly through the enclosure, so components remain cool. This MSI MPG SEKIRA 500X gaming chassis features hinged swing doors with 4mm tempered glass, letting you show off your system.

    5 Features
  • 7 drive bays: Include 4 internal 2.5" / 3.5" and 3 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 4 USB 3.2 Gen 1, 1 microphone jack, 1 headphone jack and 1 USB 3.2 Gen 2 for installing peripherals.
  • 4 cooling fans: Include 1 front-mounted 200mm, 2 top 200mm and 1 rear 120mm fans.
  • 10 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by Albert, 10 out of 10
    Awesome

    I've been building PC's since about 2006. This by far was a splurge but very worth it. I had a huge case before with the NZXT Phantom but it was old and didn't have a lot of the new age holes pre-built for this era. There is plenty of room in this thing. This is also my first tempered glass case and it is very aesthetically pleasing to say the least. My last case was clear plastic and I always loved looking into my case but with this glass it's so premium it feels like mildly tinted Audi A5 windows. The cable management is also superbly done. The fans are whisper quiet and the leds can change on their own or be controlled by the motherboard with a simple 3 second hold on the top LED button. I can't speak anymore highly of this case. Of note, I only purchased this case because I was hindered by the small amount of room in my NZXT Noctis 450 ROG. I wanted a 2080Ti GPU really bad but it would not fit into my last case. I was never hindered by a case before so after 2 years with the Noctis I wanted something big enough to never be hindered again! 10 out 5 stars if I could!

    Apr 11, 2020 19:33
  • Review by Evotwo, 10 out of 10
    Best case ever!

    Plenty of room to work and it looks great! They include wire management straps and with a little creativity you can make everything nice and neat. Definitely on the large but just check the dimensions to make sure it will work for you.

    IMPORTANT:

    the fans on the top will need to be flipped over. Its shipped with the front 2 200mm AND the top 2 200mms set to intake air with only the small 120 to exhaust. I simply flipped the top fans over to exhaust and my temps are great! Super high quality HEAVY case too, this is the best value in my opinion.

    Jan 14, 2020 23:09
  • Review by StrawberryT, 10 out of 10
    SO MUCH ROOM FOR ACTIVITIES!!!!!

    My last case was a basic iBuyPower Mid-Tower and I had been wanting something a little bigger for a while so when I saw this one and people were saying it was large I really didn't believe them. I purchased it recently and holy crap they were right! I love having room to expand and put things on the inside of my case and now I am actually able to do that!

    It has vertical mounting capabilities for the graphics card which means I can FINALLY show off my beautiful 1080 Ti and the magnetic doors make it the easiest case I have ever worked with by far. I have never had an MSI case before but man I am not going back now.

    This case comes with 5 built in fans and the cables are already managed nice and neat which is amazing and the fact that it has 4 USB 3.0 slots on the top to go along with the 4 already on my mobo makes my life so much easier when it comes to VR gaming.

    Overall very happy with this purchase and would recommend it to literally anyone that asks because it is truly the best case that I have ever had.

    PS the RBG fans have SO MANY OPTIONS when it comes to choosing colors that I spent an hour deciding which setting I liked the most.

    Feb 07, 2020 16:25
  • Review by JLog, 10 out of 10
    Extremely customizable, and all the room you need!

    I purchased this case to do a new AMD build and love this case! Filled it with an x570 MSi Meg Ace motherboard, a Ryzen 7 3800x processor, and a vertical mounted MSi RTX 2080 Ti gpu! Plenty of room for extra fans and even a case action figurine.

    If you need a case with options and incredible aesthetics, look no further... Buy this case.

    Aug 18, 2020 01:13
  • Review by Mark56208, 10 out of 10
    Great case with 4 free fans and great air flow!

    *Pros Price, 4 120mm RGB fans with RGB controller included along with a Header adapter for the 3 front fans if you do not have enough RGB headers on the motherboard. The case has a awesome way to take off the side panels, you remove the top then the sides slide out and out. Tempered glass is nice and clear no small imperfections.

    *Had been looking for a case for my new build with great air flow. I had looked at a few Corsair cases most only came with three RGB fans and one standard fan this one came with four. This was the size I wanted and it had four fans and the case was the cost of a 4 pack of RGB lighting..

    The case has tons of room to add a liquid cooler, Lots of room for my 1660 ti to breath and we all know AMD runs hot. Super buy.

    *Cons only two and not to big of a deal breaker. One fan header on the controller was bad but the controller had another free spot and works just fine, And wish the screw quality was a little better threads are not all cut the greatest But have seen the same quality in other cases.

    Aug 31, 2021 07:29
  • Review by RafsRigs, 10 out of 10
    Love it. Best case I've had since the EVGA DG-87

    Firstly, let's address some other reviews about airflow.. I'm using a GTX 1080 ti strix edition, my card runs around 65C during intense gameplay. I flipped the two 200mm fans on the top to exhaust and have zero temp issues. Airflow is fine if you know how to do it properly.

    Secondly, this case is huge, definitely not a mid tower, you can fit any other mid tower case inside of this case with room to spare. Just look at the photos and how small those 200mm fans look.

    Third, the doors are magnetic, in some other reviews out there, people have had issues with doors not closing due to cable management. I'm using a non-modular power supply with 30cm cable extensions and have had zero issues with the doors closing, even without using zip ties.

    The build quality is a solid and you definitely get what you pay for. The MSI fan controller hub is solidly placed and extremely easy to use.

    I feel like negative reviews of this case are fake as I can't find any flaws if you actually do your research before ordering. 10/10

    Mar 20, 2020 16:20
  • Review by Andrew, 10 out of 10
    awesome case

    This case has plenty of room, I have an ASRock fatal1ty mb and this case has plenty of room. I'm planning on doing a custom loop soon and this case should have more than enough room. The led button makes it easy to change the fan colors.

    Feb 29, 2020 08:35
  • Review by Jwatkc, 10 out of 10
    Great case and lots of room and options.

    The case does a well job keeping your components cool. Using a i7-9700k, 32gb 3500mhz ram, msi gaming edge motherboard. The 4 200mm fans do a great job. After a 4-5 hour gaming sessio, temps were under 70 degrees C. The only thing I don’t like is I can’t control the rub through the mystic light app. There is a button on top of the case that changes the color.

    Jan 13, 2020 13:30
  • 8.6score
    NZXT - H510i Compact ATX Mid-Tower Case with Tempered Glass - Matte Black
    Description

    Build the ultimate rig with this matte black NZXT compact computer case. Integrated LEDs enhance the look of your build with colorful lights, and the included application makes it easy to change color settings. This NZXT compact computer case has a built-in USB-C port that lets you share large files in seconds.

    9 Features
  • 6 drive bays: Include 3 internal 2.5" and 3 internal 3.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 1, 1 USB 3.1 Gen 2 and 1 headphone/microphone jacks for installing peripherals.
  • Tempered glass side panel: Offers an unobstructed view of the case's contents.
  • 2 cooling fans: Include 1 rear 120mm and 1 top 120mm fans. Two 120/140mm front-panel fan mounts allow easy enhancements.
  • Front and PSU fan filters: Help maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Water cooling support: Removable bracket designed for radiators up to 240mm simplifies the installation of either closed-loop or custom-loop water cooling.
  • Enhanced cable management: Patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 8 Most Useful Reviews
  • Review by Oblivion, 8 out of 10
    Good case

    This is a good case for a first build. Only thing I wish there was a second perforation on the top to add a second 120MM!

    Sep 25, 2020 16:01
  • Review by Hippie, 10 out of 10
    Great case for the price

    I purchased this along with a new graphics card because I decided it was time for an upgrade! This case is great! plenty of room for what I wanted to put in it and cable management was easy!

    Oct 09, 2020 20:37
  • Review by dmakar87, 10 out of 10
    Good Solid Case!! Great for Sci-Fi Build!!

    The NZXT 510i Black case is solid and nicely built for someone who is into SCI-FI and wants a SCI-FI themed PC. Case has plenty of space to build a PC in it and has great airflow.

    It's my second time building in this 510i (White and Black) series case. Love it!

    Defiantly recommend it!

    Apr 28, 2021 12:46
  • Review by Kaysee, 10 out of 10
    Nice Case!

    Love the product and color of it, was hoping for a white one, but never could get ahold of one! Still looks great with my RGB lights.

    Mar 01, 2021 00:44
  • Review by PCbuilder1988, 8 out of 10
    Great PC Case!

    This PC case offers great thermals and is easy to build in. Only reason for the 4 stars instead of 5 is that it is difficult to do proper cable management in the back of the case. The thumb screws are painted which makes them hard to remove. And in the case I received, it was difficult to install my kraken z63 AIO the way recommended by Gamers Nexus (because of a rogue USB header cable). Despite these shortcomings, this is a great case!

    Sep 18, 2020 17:41
  • Review by Zaydax, 10 out of 10
    Solid case

    Great case, wish it had more front IO.

    Solid construction, good features, easy to build in.

    my AIO cpu cooler rad is at the front and I have 4 noctua fans in the case with a 9700K and a 3070 FE. Stays quiet and cool.

    All needed accessories included.

    Apr 30, 2021 10:00
  • Review by Billf0rd, 10 out of 10
    I like it

    Need to download NZXT Cam for control of rgb lights and fan. Other than that, seem like a quality build. Clear glass, not tinted like some other ones.

    Apr 30, 2021 14:55
  • Review by FirstBuild, 8 out of 10
    First computer build

    Good case for my son’s first computer build. 4 stars since the directions for the various connections could have been more clear. Overall, satisfied with the purchase.

    Jan 01, 2021 18:18
  • 8.6score
    CORSAIR - 110R ATX Tempered Glass Mid-Tower - Black
    Description

    The CORSAIR 110R is a minimalist mid-tower ATX case with a 4mm-thick tempered glass side panel and storage support for up to four drives, plus a 5.25in ODD drive bay. A 120mm fan is included for cooling right out of the box, with the potential to fit up to 5x 120mm, 3x 140mm fans, or multiple radiators for the cooling you need. Keep your build tidy with a full-length PSU cover that keeps your PSU and cables out of sight, and three removable dust filters to keep your system clean long after the build is finished. With a USB 3.1 front I/O panel for easy access to your favorite devices, the 110R has the essential features you need to build a great PC.

    7 Features
  • A Subtle Showcase: The 110R’s minimalist design ensures that your system can fit in almost any environment and displays your components through a beautiful tempered glass side panel.
  • Flexible Storage Options: Supports up to four drives for the storage options you need: two 2.5in trays and two combo 3.5in / 2.5in trays in a removable cage, plus a 5.25in ODD bay.
  • 120mm Fan Included: Ready to cool your components out-of-the-box.
  • Strong Cooling Potential: Fits up to 5x 120mm or 3x 140mm cooling fans or multiple radiators to keep your PC cool.
  • Full-length PSU Cover: Hide your PSU and cables out of sight, making immaculate builds easier to create than ever.
  • Keep Your System Clean: Removable dust filters in the floor, roof and front help keep your system clean long after the build is finished.
  • Up-Front Connections: A front I/O panel with two USB 3.1 Type-A ports and a combined microphone/headphone jack provides easy access to your favorite devices.
  • 7 Most Useful Reviews
  • Review by Hovo, 10 out of 10
    Great case

    Nice quality case. Needed a case quick and this was the cheapest corsair mid tier case i could get the fastest and its perfect

    Sep 17, 2021 22:23
  • Review by Lambda, 10 out of 10
    Corsair Case

    Its been a month using this pc case and its great!!

    Oct 16, 2021 09:04
  • Review by Dave, 10 out of 10
    Of Counsel

    Excellent cases. Built two new PCs using this case. Good size for ease in installing parts, cards and wiring.

    Jun 25, 2021 18:43
  • Review by Speck, 4 out of 10
    Wish I could return it

    A decent starter case if you don't need much airflow. I had to pop the front off to help cool things down. Things run hot even with my 3 extra fans.

    Oct 28, 2021 18:34
  • Review by Kawakji, 8 out of 10
    A nice little case for those who like simplicity!

    An excellent case for the price; good cable management, very easy to both disassemble and shift around its modular bits and pieces, lightweight for easy maintenance, ample fan space. A few caveats, however; The dust filtration capabilities of this case are almost zero. There's a little magnetic pull-away filter on the top-mount fan port and a pull-out filter for the bottom port, but the all-important front fans which are normally set to an intake role have zero dust filtration at all; with the way they're structured, you would have to finagle an aftermarket solution with a 3d printer or something. Either that, or reverse your fans' directions so that the case circulates air out the front. Other little things: The I/O ports are top mounted, so you're gonna want to invest in some plugs to keep those free of dust and debris in the long term while they aren't in use. (You can 3d print 'em, you can have some else print 'em for you, you can buy 'em by the bag of 24 for a pittance.) The single combination mic/headphone jack lacks sufficient intelligence to identify when you're plugging in a lone microphone as opposed to a headset with a microphone, so if you tried to use that port with, say, a dedicated mic on a stand, your system would probably mute your speaker outputs, thinking it's seeing a headset where there is none.

    I would say that if you dust your case out often (as you should), this case'll treat you just fine for a good long while—at a great price point, to boot.

    Sep 17, 2021 23:30
  • Review by Anton, 10 out of 10
    A nice lower end case.

    This is a very beautiful case. I wish I could get the white, but my room has animals and I just didn't think it would stay looking clean for long. The black which I got looks good too though. Most clear sided cases are not actual glass they are plastic. I didn't want to spend a lot on a case, but they don't have a ton of options for lower end cases. This was a little more than I wanted to spend, but I do think it is worth it. I love the filters on the fan mounts.

    Aug 26, 2021 17:57
  • Review by FriscoSteve, 8 out of 10
    Nice case and good price.

    Nice case but no disk activity light. Price was right.

    Sep 24, 2021 17:44
  • 8.6score
    NZXT - H210i Mini ITX Tower Case with Tempered Glass - Matte Black
    Description

    Customize your build with this matte black NZXT compact computer case. The tempered glass side panel showcases your components, and integrated LEDs enhance the look of your computer with personalized color schemes. This NZXT compact computer case has a cable management bar that makes it easy to keep cords organized and tangle-free.

    7 Features
  • 5 drive bays: Include 1 internal 3.5" and 4 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 1, 1 USB 3.1 Gen 2 and 1 headphone/microphone jacks for installing peripherals.
  • 2 cooling fans: Include 1 top 120mm and 1 rear 120mm fans. Two 120/140mm front-panel fan mounts allow easy enhancements.
  • 2 expansion slots: For adding graphics cards and other components.
  • Smart device v2: Includes a fast microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
  • NZXT CAM application: Use the intuitive application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans.
  • Motherboard support: Compatible with mini ITX motherboards.
  • 7 Most Useful Reviews
  • Review by kyle, 10 out of 10
    Great beginner ITX case!

    ITX cases are a whole niche to the PC community and this case is a great entry level point. Everything is nice quality with everything you need for a chassis.

    Jan 01, 2021 17:07
  • Review by tdawson, 8 out of 10
    Awesome Case

    Loved building in this case. As someone who has only built one other mini itx system this was a wonderful upgrade. I previously came from an InWin A1 that was awful to build in and cable manage. This is not the case with this one. Airflow is surprisingly good, the RGB is okay. I still haven't quite figured all of it though. Also haven't taken the time. But if you want a little to no compromise itx case this one is great. It's a bit bigger than your usual ITX case but I don't mind it.

    Jun 22, 2021 15:47
  • Review by LandoVash, 10 out of 10
    Great value case with clean integration.

    Great value-oriented case and very easy to build in. Highly recommend for an ITX starter system... did wish however that PCIe slots were 3-4 instead of just two as most GPU's today with quality air cooling systems are 2.75 -3 slot. The lighting module took some time to recognize on my Z170 MB and initially thought it was defective, took installing software to have firmware updated and then motherboard would update accordingly.

    May 07, 2021 15:23
  • Review by Paul, 10 out of 10
    Very well designed

    This case exceeded my expectations! Plenty of space for a radiator, full size GPU and doesn't look messy. I especially appreciate the cable management options. Would highly recommend this case to anyone looking for a Mini-ITX build.

    Apr 02, 2021 15:52
  • Review by Wonj, 10 out of 10
    Convenient PC case.

    I've been using this case for about 5 months now and it's doing its job. Not the best cooling PC, but it's easy to build compare to other cases. Not a lot of rooms for wires from back side.

    Apr 09, 2021 20:58
  • Review by IBuyToMuch, 6 out of 10
    4 pin connecters came bent . Good looking case tho

    My case came damaged , a couple of the 4 pin connecters were bent . I was capable of fixing one , but the other broke . Please please please check all of the components before building the whole thing . Clean looking case though.

    Dec 27, 2020 15:21
  • Review by ThinkAces, 6 out of 10
    Fun, small, packs some heat

    Cooling could be better inside. It was fun to setup however

    Apr 25, 2021 01:00
  • 8.6score
    NZXT - H210i Mini ITX Tower Case - Matte White
    Description

    Build your dream PC from scratch with this white and black NZXT mini-ITX computer enclosure. The NXZT CAM application lets you choose from RGB lighting presets or custom controls for advanced customization, while the cable management system uses preinstalled wiring channels for easier cable routing. This NZXT mini-ITX computer enclosure features a modern design with a tempered glass side panel for aesthetic appeal.

    5 Features
  • 5 drive bays: Include 1 internal 3.5" and 4 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.1 Gen 1, 1 USB 3.1 Gen 2 and 1 headphone/microphone jacks for installing peripherals.
  • 2 cooling fans: Include 1 top 120mm and 1 rear 120mm fans. Two 120/140mm front-panel fan mounts allow easy enhancements.
  • 2 expansion slots: For adding graphics cards and other components.
  • Motherboard support: Compatible with mini ITX motherboards.
  • 7 Most Useful Reviews
  • Review by kyle, 10 out of 10
    Great beginner ITX case!

    ITX cases are a whole niche to the PC community and this case is a great entry level point. Everything is nice quality with everything you need for a chassis.

    Jan 01, 2021 17:07
  • Review by tdawson, 8 out of 10
    Awesome Case

    Loved building in this case. As someone who has only built one other mini itx system this was a wonderful upgrade. I previously came from an InWin A1 that was awful to build in and cable manage. This is not the case with this one. Airflow is surprisingly good, the RGB is okay. I still haven't quite figured all of it though. Also haven't taken the time. But if you want a little to no compromise itx case this one is great. It's a bit bigger than your usual ITX case but I don't mind it.

    Jun 22, 2021 15:47
  • Review by LandoVash, 10 out of 10
    Great value case with clean integration.

    Great value-oriented case and very easy to build in. Highly recommend for an ITX starter system... did wish however that PCIe slots were 3-4 instead of just two as most GPU's today with quality air cooling systems are 2.75 -3 slot. The lighting module took some time to recognize on my Z170 MB and initially thought it was defective, took installing software to have firmware updated and then motherboard would update accordingly.

    May 07, 2021 15:23
  • Review by Paul, 10 out of 10
    Very well designed

    This case exceeded my expectations! Plenty of space for a radiator, full size GPU and doesn't look messy. I especially appreciate the cable management options. Would highly recommend this case to anyone looking for a Mini-ITX build.

    Apr 02, 2021 15:52
  • Review by Wonj, 10 out of 10
    Convenient PC case.

    I've been using this case for about 5 months now and it's doing its job. Not the best cooling PC, but it's easy to build compare to other cases. Not a lot of rooms for wires from back side.

    Apr 09, 2021 20:58
  • Review by IBuyToMuch, 6 out of 10
    4 pin connecters came bent . Good looking case tho

    My case came damaged , a couple of the 4 pin connecters were bent . I was capable of fixing one , but the other broke . Please please please check all of the components before building the whole thing . Clean looking case though.

    Dec 27, 2020 15:21
  • Review by ThinkAces, 6 out of 10
    Fun, small, packs some heat

    Cooling could be better inside. It was fun to setup however

    Apr 25, 2021 01:00
  • 8.6score
    Thermaltake - Level 20 ATX Micro-Tower Case - Black
    Description

    Build a desktop computer with this Thermaltake Level 20 mid-tower chassis. The four 120mm fans ensure proper ventilation, while the power unit cover helps with cable management to deliver an organized configuration. This Thermaltake Level 20 mid-tower chassis features a tempered glass window to protect the setup while offering a viewing of the RGB lighting.

    6 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 6 drive bays: Include 3 internal 2.5", 2 drive cage 2.5" / 3.5" and 1 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 3.0, 1 microphone jack and 1 headphone jack for installing peripherals.
  • 4 cooling fans: Include 3 front-mounted 120x120x25mm and 1 rear 120x120x25mm fans. Top fan mounts, two 120mm right side-panel fan mounts and two 120mm bottom fan mounts allow easy enhancements.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 5 Most Useful Reviews
  • Review by rmiller826, 10 out of 10
    Sick case, easy and fast setup, beautiful case

    So easy to setup and cable manage, perfect space for all my components and extra RGB fans.

    May 02, 2020 08:20
  • Review by Jaheezy, 6 out of 10
    Cooling Fan went out

    There is not alot of space for cable management and the RGB is just meh. To top it off, the middle fan stopped working. All and all...I would not recommend.

    Jun 11, 2020 09:17
  • Review by xBlaze1992x, 6 out of 10
    Great case, decent look.

    This case has been interesting to build in! I down sized from a server case (ThermalTake MK Chaser 2) and a crap ton of air flow!.

    This case disappointed me during unpackaging! The box was dented, scratched, etc and upon unboxing? I discovered on the right side plate (where you manage wire routes) what looks like it was dropped before packaging or pressed on something hard, also, the 4 case screws had to be bent straight because they were screwed in at an angle! After this, wires were not in a zip lock bag and they were just tossed I to the case and the plastic protection over the glass on the front and side looked like it caught on something or a three year old picked at it! I was very disappointed when unpackaging this case. But to the pros and cons!

    Pros:

    #1: Side panel Cable Management: managing cable route were easy! Alot of working room in the back!

    #2: SSD & HDD Mounting: it has two quick disconnects for SSDs and 2 places for SSD's on the side or top (unless you want Fans there) also has 2 slots in the back for HDD's with plenty of room for airflow.

    .

    Cons:

    #1: E-ATX Cable connections: If you have an Extended ATX board like myself? You WILL NOT be able to use straight SATA cables if you have an AIO to the right of the MoBo! You will have to use 90 degree plugs from the MoBo and you can't do it if the Radiator is already mounted, it has to come off and move away to utilize the plugs.

    #2: Fan Mounting: it's hard! Barely any room for any additional fans even tho the mounts are there! So just be careful and make sure you install fans after you do the MoBo and AIO and make sure you do it before you install the GPU.

    #3: GPU mounting: mounting the GPU was hard since the Radiator is to the right of the Motherboard (Gigabyte GTX 1060-6GB, Corsair h100i pro RGB), had to squeeze the GPU past a part of the fan to get it in but it fits perfect after that and just touches the fan caseing which I do like cause it prevents sagging.

    #4: Air flow: omg, air flow/cooling sucks! Make sure you plan your fans accordingly and get good quiet high speed fans, if you don't buy any right off? Make your Radiator fans high speed and ejecting out, three fans in front are already intake and make your rear fan ejection high speed max fixed through Bios.

    #5: I do not recommend a modular PSU for this case! If you use one? Either connect all cables needed before installing PSU, or do what I did and take the right HDD bracket off.

    I hope this helps.

    Aug 30, 2019 22:16
  • Review by Azizur, 10 out of 10
    Great case for gaming

    This really looks good and also cheap in price. I will recommend everyone.

    May 30, 2020 02:32
  • Review by Jennjean, 10 out of 10
    Amazing

    Great start to building my new computer. Description was right on point and looks awesome.

    Dec 17, 2020 16:29
  • 8.4score
    Thermaltake - S300 Tempered Glass Snow Edition ATX Mid-Tower Computer Case with 120mm Rear Fan Pre-Installed - Snow
    Description

    S300 Tempered Glass Edition mid-tower chassis combines sophistication and elegance and is built with modern steel construction. Like the S500 TG, the S300 TG is designed to be compact and is manufactured with one tempered glass window on the left for a stunning view and one preinstalled 120mm standard fan at the rear for fundamental ventilation. Furthermore, it incorporates a full modular design, vertical radiator & GPU mount, Patented Rotational PCI-E slots, and the support for 200mm fans. The flexibility is limitless for high-end components. The S300 TG Mid Tower Chassis is a great fit for users who are looking for a modern and stylish chassis.

    6 Features
  • Compact and Elegant Design: Full metal construction with sleek front panel design, the S300 TG Mid Tower Chassis showcases its simply and elegant design.
  • Built-in PSU Cover and Riser GPU Bracket: The built-in PSU cover with a ventilated design can improve airflow and hide those unsightly cables. The integrated riser GPU support bracket not only prevents the graphic card from sagging, but helps reduce the weight on the motherboard PCI-E slots.
  • Patented Rotational PCI-E 7 Slot Design: With Patented Rotational PCI-E slots, you can choose to display your graphics cards vertically which helps you gain flexible space for your system.
  • Tempered Glass Window: The 4mm tempered glass window on the side of the S300 TG is built to be more durable, scratch resistant, and transparent for an advanced view of your hardware.
  • Dust Reduction: Two magnetic super fine fan filters with excellent protection and reduction against dirt on the top and the right side and another removable filter at the bottom.
  • Handy I/O Ports: One 3.0 USB and two 2.0 USB ports on the top-front panel to grant direct access when needed.
  • The Most Useful Review
  • Review by Chris, 8 out of 10
    Good case at a good price

    I searched for a case at this price point (~$100 at time of purchase) that could fit two 360mm radiators, one in top of the case and another in a side or bottom position. I know a lot of cases allow for front mounted 360mm radiators but I wanted to avoid feeding the second rad hot air from the first.

    The S300 fit the bill almost perfectly. I am doing this build slowly and this case has been fun to work in.

    The steel frame feels sturdy on most sides of the frame. When I move it the case does not flex.

    The front panel comes off easily with a tug but is surprisingly thick and stiff in construction.

    The PSU can be mounted with fan facing up or down.

    The dust filters on the bottom are held by tabs and easy to remove from the outside. The top dust filter is held with magnets.

    The PSU shroud, 2.5” SSD/HDD mounting plates, and 3.5” HDD enclosure are all easily removable.

    Space for cable management is OK and there are no covers for the cable routing holes. The back side of the motherboard tray does feature many small metal loops for cable ties and there are some ties included in the parts box.

    The case comes with one 120mm fan (3pin connector) mounted in the rear fan location. I have not used it and cannot speak for its speed, sound level/quality. I have my own fans and controller.

    Front mounted fans 1”/25mm thick) can be installed on either side of the front frame and fit under the front panel. I will be mounting my front fans on the outside due to my side radiator’s width.

    The parts box contains a fair number of screws and ties as one would need for a first build. They are all black which is nice. Eight 6-32 screws a little over 1” long are provided for mounting a radiator with fans to the case.

    I have had a few issues with the case.

    Two issues with the top mounted 360mm radiator caused by the rearward position of the vented section and the USB ports/buttons near the front.

    1) my Swiftech 360mm radiator could only fit with ports facing forward and…

    2) to provide clearance around the port/button assembly my fans had to be sandwiched between the case top and radiator. My fans are standard 25mm thickness, thin fans would not have worked.

    This was not the end of the world but I had hoped to have my radiator ports rearward to help keep my tube lengths short.

    It did make for one advantageous positioning with the side mounted 360 rad’s ports lining up well with the top rad for a short connection. A 90 degree fitting on the top rad was needed.

    There is a reason the ThermalTake documentation does not explicitly mention support for a top mounted triple rad.

    And if you put a 360mm radiator on top it blocks the rear 140/120 fan spot. I had wanted to put a radiator there too.

    A note about the provided thumbscrews, the paint seems to interfere with the tapped ports making a screwdriver a requirement, so much for the tool free access. It may get better with time but for now it is a bit of a pain.

    Another thing about the paint, it is very pretty and even on the surfaces. I somehow nicked a spot on a rounded corner on the front panel after it fell on the corner from a height of 1 ft onto thick carpet, so be careful.

    The metal on the back panel where the modular bay starts is very thin and prone to bending when the modular bay’s retention bracket is not screwed in tight.

    To get the vertical GPU setup a PCIe extension cable has to be purchased separately. I bought a ThermalTake branded cable and had no issues with the installation. Not really an issue at this price point but something to remember.

    The modular bay is easy to change, there are a couple plastic spacers in the parts box to choose from to support the GPU on the right corner of the mounting plate closest to the window.

    These issues are the sole reason I am giving this review 4 stars instead of 5.

    May 14, 2021 19:28
  • 8.0score
    GAMDIAS - ARGUS eATX Mid-Tower Case - Black
    Description

    Assemble a high-performance computer system with this Gamdias ARGUS mid-tower case. The tempered glass window lets you showcase your setup, while I/O ports with accent lighting enable easy access. This Gamdias ARGUS mid-tower case features multiple drive bays for flexible storage options, and the magnetic dust filter protects components from dirt.

    6 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 4 drive bays: Include 2 internal 2.5" / 3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 2.0, 1 microphone jack, 1 audio line-out and 1 USB 3.0 for installing peripherals.
  • Magnetic fan filter: Helps maintain a dust-free interior.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX, mini ITX and eATX motherboards: So you can easily begin building a custom computer.
  • 5 Most Useful Reviews
  • Review by Ryan, 8 out of 10
    Good but could be better

    The case is pretty big and i can't connect the front panel lights to my motherboard to control how they go but they still work. The vents in the back where your gpu will come out break off instead off screw on and off so be careful to do the correct one when you are putting that in. pretty good airflow other than that and plenty of space for fans and water cooler if you want.

    Apr 07, 2020 07:20
  • Review by Zombie, 8 out of 10
    Good for beginners

    It’s a good looking case has RGB on the front of it but does not come with any fans

    Jul 11, 2020 10:19
  • Review by notrecived, 2 out of 10
    recived

    i dont recived this i cant say what is this because i never get it back

    May 18, 2020 23:07
  • Review by Brad, 8 out of 10
    No place to put a DVD drive

    Nice lights easy set up for my new mother board. but on the whole very easy to place a mother board hard drive and Power supply in place. I am now looking for more light effects for my case.

    Jan 03, 2020 20:16
  • Review by Tryagain, 10 out of 10
    It's actually pretty good

    The case in general is actually pretty good, It was easy to get outside of the box, and had no problems installing anything in it, highly recommend it for beginners.

    Sep 22, 2020 21:09
  • 7.2score
    GAMDIAS - TALOS Micro ATX Mid-Tower Case - Black
    Description

    Keep hardware safe from damage with this Gamdias Talos RGB PC case. The tempered glass panels let you view components at a glance while offering durability. This Gamdias Talos RGB PC case features two built-in 120mm ring RGB fans to keep contents from overheating, and the large size makes switching out hardware simple.

    6 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 3 drive bays: Include 1 internal 2.5" / 3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 2 USB 2.0, 1 microphone jack, 1 audio line-out and 1 USB 3.0 for installing peripherals.
  • 2 cooling fans: Include 2 front-mounted 120mm fans. Two 120/140mm top fan mounts and one 120/140mm rear fan mount allow easy enhancements.
  • 4 expansion slots: For adding graphics cards and other components.
  • Supports micro ATX and mini ITX motherboards: For use with a wide range of systems.
  • 5 Most Useful Reviews
  • Review by ChaseMe, 10 out of 10
    Case

    It holds all my sons computer parts as it should.

    Sep 24, 2021 18:16
  • Review by TeacherJeff, 8 out of 10
    Great finished look.

    The case looks great and I used it to build myself a budget

    PC. The only knock I give it is there is very limited space for cable management. The fans that come with it plug into peripheral connectors rather than directly to the motherboard. This adds more wires to an already small area. Other than the space issues the case looks great once you manage to master the web of wires.

    May 16, 2020 20:06
  • Review by disco, 8 out of 10
    Good budget case

    Good budget case the added rgb fans that come with It is a plus for me

    Feb 08, 2020 13:53
  • Review by susiebelle, 8 out of 10
    it good

    exactly what was needed to complete a project. even the fans were perfect

    May 16, 2020 05:45
  • Review by Nj12, 2 out of 10
    Nice looking case

    Case looks good front ventilation is ok for price and space cable management is tight. Would have been ok if the case glass didn’t come broken.

    Jul 25, 2020 01:08
  • 7.2score
    CyberPowerPC - Syber C Mini ITX Desktop Case - Black
    Description

    Build a compact gaming computer with this CyberPowerPC Syber case. Its small form factor lets you enjoy the benefits of console gaming while offering sufficient room for high-performance desktop components, and the front panel's input ports are suitable for keyboards, mice, controllers and headsets. This CyberPowerPC Syber case has RGB LED case lighting for ambience.

    3 Features
  • Front-panel ports: Include 2 USB 3.0 and 2 audio line-out/microphone for installing peripherals.
  • 2 expansion slots: For adding graphics cards and other components.
  • Motherboard support: Compatible with mini ITX motherboards.
  • The Most Useful Review
  • Review by Nope, 2 out of 10
    No power supply included

    The product description on Best Buy says it comes with a power supply, but it does not.

    Also, you need to purchase an SFX power supply to go with this, and if you don't want a low quality one, be prepared to spend around $70+ on the power supply. This seems quite silly when they could have made the case like..1" larger to accommodate regular PSU's.

    Oh well, it would have been a fun case at $34.99 on sale.

    Aug 08, 2019 20:18
  • 2.0score
    Thermaltake H200 Tempered Glass Snow Edition RGB Light Strip ATX Mid Tower Case with One 120mm Rear Fan Pre-Installed - Snow
    Description

    The H200 TG RGB is designed for PC builders who want a clean and sleek look but crave for good cooling performance and tempered glass at the same time. The H200 TG RGB is a standard mid-tower chassis with motherboard support up to ATX. It comes with one preinstalled standard 120mm fan, and an RGB button that can switch between 19 lighting modes. Brining you an exteriorly simple look and internally sophisticated design.

    6 Features
  • Classic Design with RGB Light Bar Front Panel: With an unique RGB light bar, the front panel of H200 TG RGB presents a smooth and elegant style.
  • Built-in PSU Cover: Comes with a full-length PSU cover with a ventilated design to enhance the airflow and hide those unsightly cables.
  • Tempered Glass Window: The tempered-glass hinge door is designed with a smart lock security system which secures the inner components of your case. H200 TG RGB is built to be more durable, scratch resistant and, of course, easy-to-use.
  • Superior Hardware Support: The H200 TG RGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual VGA expansion slot of up to 320mm in length, and a power supply with length of up to 160mm (with 3.5” HDD Drive installed) and up to 220mm otherwise.
  • Excellent Cooling Capability: Optimized for excellent cooling capability with one 120mm fan preinstalled. The case is able to house up to dual 140mm or three 120mm front fans, up to 2x 140mm fans on top, and a radiator size up to 240mm on top to allow users to build a desired high-end system.
  • Handy I/O Ports: Two 3.0 USB ports on top of the front panel grants direct access when needed. A specially designed RGB control button provides users 19 different light effect selections.
  • The Most Useful Review
  • Review by Maddy, 2 out of 10
    It did not work.

    I now know not to buy a case with 0

    reviews. The entire set up was flawless, yet my computer would not turn on. I took it into Best Buy and they said it was likely the case. I decided to try to start it up with a screwdriver, and sure enough it turned on. The wires connecting the case to the motherboard are definitely defective. I wish I would have bought a different case.

    Aug 12, 2021 16:53
  • 2.0score
    Thermaltake - Versa ATX Mid-Tower Case - Black/White
    Description

    Personalize your gaming PC for future expansion with this Thermaltake Versa Snow Edition mid-tower chassis. The raised feet enhance airflow for maximum ventilation, while a transparent side panel offers a clear view of the LED-lit interior, adding visual appeal. This Thermaltake Versa Snow Edition mid-tower chassis features a tool-free design for easy installation.

    7 Features
  • SPCC steel construction: Provides durability for long-lasting use.
  • 6 drive bays: Include 3 internal 2.5" / 3.5", 1 internal 3.5" and 2 internal 2.5" drive bays for installing a variety of components.
  • Front-panel ports: Include 1 USB 3.0, 2 USB 2.0, 1 audio line-in and 1 audio line-out for installing peripherals.
  • Windowed side panel: Offers an unobstructed view of the case's contents.
  • 3 cooling fans: Include 1 rear 120x120x25mm and 2 front-mounted 120x120x25mm fans. Two 120mm top fan mounts allow easy enhancements.
  • 7 expansion slots: For adding graphics cards and other components.
  • Fits ATX, micro ATX and mini ITX motherboards: So you can easily begin building a custom computer.
  • 2 Most Useful Reviews
  • Review by Jarod, 2 out of 10
    Terrible case

    It's a decent case but overall, I cannot work around with this case for my liquid cpu cooler and cable management seems impossible. The storage bays are riveted into the case making custization impossible unless you have a drill or willing to buy a drill to remove the bays.

    Oct 01, 2020 21:56
  • Review by Soul, 2 out of 10
    Not as advertised

    Bought this as a recommended replacement because they didn't have the case I wanted, just to find out that unlike the picture, it is not a clear glass side, it has a glossy plastic side... False advertising much?

    Oct 16, 2019 04:21
  • 2.0score